How to recover data from Infortrend EonStor GSe 4024 NAS

Contents

• Why can’t ordinary software tools restore files from RAID?
• How to take hard disks out of the NAS and connect them to a PC?
  • Restoring data with Hetman RAID Recovery
  • Safe recovery from disk images
  • Where are user’s files stored?
  • Comparison of software for RAID recovery

Why can’t ordinary software tools restore files from RAID?

Conventional hard disks keep user’s data by writing it to their surface in a consecutive way, and this is how an entire file is stored on a single hard disk. However, when data is written to a RAID system, a file is divided into several parts. Then these parts are written consecutively to all hard disks within such array. The size of such parts may range from 2 KB to 2 MB, so each file is stored on several hard disks at the same time.

Such approach helps to speed up read and write operations, and it is evident that saving two parts of a file having the size of 1 GB to two hard disks simultaneously is much faster than saving the same 1 GB of data to one hard disk. However, this peculiarity makes file recovery more complicated.

Various RAID levels store information in different ways. Additionally, manufacturers like Infortrend also introduce some modifications to this process, and that is why data can be written to hard disk in a wide variety of ways.

How can file system corruption impact data integrity on NAS Infortrend EonStor GSe 4024 devices?

File system corruption on NAS devices like Infortrend EonStor GSe 4024 can have a significant impact on data integrity. Here are some ways it can affect data:

1. Data loss: File system corruption can lead to the loss of data stored on the NAS device. This can happen if the corruption affects critical system files or metadata required to access and retrieve the data.
2. Inaccessibility: Corruption can make the file system inaccessible, preventing users from accessing their data. This can be a temporary or permanent issue depending on the severity of the corruption.
3. Data inconsistency: Corruption can cause data inconsistencies within files or across the file system. This means that the data may become fragmented, duplicated, or contain errors, leading to inaccurate or incomplete information.
4. Data integrity checks: NAS devices often have built-in mechanisms to ensure data integrity, such as checksums or RAID configurations. File system corruption can compromise these checks, making it difficult to detect and correct errors in data.
5. Data recovery challenges: Recovering data from a corrupted file system can be complex and time-consuming. It may require specialized software or professional assistance to recover the data and restore it to its original state.

To mitigate the impact of file system corruption on data integrity, it is important to regularly backup data stored on the NAS device. This ensures that even if corruption occurs, a recent and clean copy of the data is available for recovery. Additionally, implementing RAID configurations and regularly monitoring the NAS device for any signs of corruption can help minimize the risk of data loss or corruption.

How to take hard disks out of the NAS and connect them to a PC?

Although NAS EonStor GSe 4024 can be accessed over the network, you still need to take the hard disks out of the storage device and connect them to a Windows computer. Only in this case will the software be able to scan them properly. Here is what you should do:

1. Turn off the storage and disconnect it from the power supply.

   WARNING! Before you start taking hard disks out of your NAS device, read the manual carefully. Incorrect actions may damage your network-attached storage and/or the hard disks within the RAID system.

2. Take the hard disks out of the NAS one by one, carefully removing them from their slots. Remember that the disks are extremely vulnerable: hitting or dropping them may result in serious physical damage.

3. Make sure to mark each hard disk in accordance with how they were installed inside the NAS.

4. Remove the hard disks and connect them to the computer. In this video, we have explored what ports are used to connect hard disks, and what to do if there are not enough ports or connectors.

Restoring data with Hetman RAID Recovery

This program recovers data from damaged RAID arrays and is fully compatible with Infortrend EonStor GSe 4024. The hard disks that make up the RAID contain technical information about the algorithm used to save files. When launched, Hetman RAID Recovery reads this information and puts the damaged array together. Then you can open the disk and save your files. Also, you can recover the files accidentally deleted from the network drive.

EonStor GSe 4024 has 24 HDD slots, and it supports the following array types:

• RAID 0;
• RAID 1;
• RAID 5;
• RAID 6;
• RAID 50;
• RAID 60;
• JBOD;

NAS supports:

• exFAT, VFAT, FAT 12 / 16 / 32;
• NTFS / ReFS;
• APFS / HFS+;
• Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
• VMFS / HikvisionFS;

Safe recovery from disk images

This utility lets you save an entire copy of the disk to file and then work with this image instead of the actual disk. Such feature helps to protect data on the disk from:

• Overwriting during the recovery process;
• Loss resulting from bad sectors;
• User mistakes.

To create an image, do the following:

1. Make sure that you have enough free space to save the image. The image file size usually equals the disk size.

2. Select the disk in the main window, and choose from the menu Tools – Save Disk. You can select multiple disks to be saved.

3. When the image creation wizard starts, you can choose to save the entire disk or select only a part of it. Specify the parameters and click Next.

4. At this stage, you need to choose a directory where to save the image. Choose any disk connected to this PC, or save the image by FTP.

Where are user’s files stored?

The Infortrend EonStor GSe 4024 network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

Comparison of software for RAID recovery