Best Practices for Data Recovery from NAS Promise Vess 1830i RAID Array Failures

Contents

• Why can’t ordinary software tools restore files from RAID?
• How to take hard disks out of the NAS and connect them to a PC?
  • Restoring data with Hetman RAID Recovery
  • Safe recovery from disk images
  • Where are user’s files stored?
  • Comparison of software for RAID recovery

Why can’t ordinary software tools restore files from RAID?

Conventional hard disks keep user’s data by writing it to their surface in a consecutive way, and this is how an entire file is stored on a single hard disk. However, when data is written to a RAID system, a file is divided into several parts. Then these parts are written consecutively to all hard disks within such array. The size of such parts may range from 2 KB to 2 MB, so each file is stored on several hard disks at the same time.

Such approach helps to speed up read and write operations, and it is evident that saving two parts of a file having the size of 1 GB to two hard disks simultaneously is much faster than saving the same 1 GB of data to one hard disk. However, this peculiarity makes file recovery more complicated.

Various RAID levels store information in different ways. Additionally, manufacturers like Promise also introduce some modifications to this process, and that is why data can be written to hard disk in a wide variety of ways.

How can regular software updates and patches enhance the security and stability of NAS Promise Vess 1830i devices?

Regular software updates and patches can enhance the security and stability of NAS Promise Vess 1830i devices in several ways:

1. Security Vulnerability Fixes: Updates and patches often include fixes for known security vulnerabilities. By regularly updating the software, you ensure that any identified security flaws are addressed, reducing the risk of unauthorized access, data breaches, or other security incidents.
2. Bug Fixes: Updates and patches also address software bugs and glitches that may impact the stability and performance of the device. By applying these updates, you can improve the overall stability and reliability of the NAS device, reducing the chances of system crashes or data corruption.
3. New Security Features: Software updates may introduce new security features or enhancements to the existing ones. These features can provide additional layers of protection against emerging threats, such as improved encryption algorithms, access controls, or advanced authentication mechanisms.
4. Compatibility with New Technologies: Updates and patches ensure that the NAS device remains compatible with the latest technologies and standards. This compatibility is crucial for maintaining a secure and stable environment, as outdated software may not support newer security protocols or hardware components.
5. Compliance with Industry Standards: Regular updates help ensure that the NAS device remains compliant with industry security standards and regulations. Compliance is essential for organizations that need to meet specific security requirements, such as those in the healthcare or financial sectors.
6. Performance Optimization: Updates and patches often include performance optimizations that can improve the speed and efficiency of the NAS device. By keeping the software up to date, you can take advantage of these optimizations, resulting in better overall performance and user experience.

To benefit from these enhancements, it is important to regularly check for software updates and patches provided by the manufacturer and promptly apply them to the NAS Promise Vess 1830i devices.

How to take hard disks out of the NAS and connect them to a PC?

Although NAS Vess 1830i can be accessed over the network, you still need to take the hard disks out of the storage device and connect them to a Windows computer. Only in this case will the software be able to scan them properly. Here is what you should do:

1. Turn off the storage and disconnect it from the power supply.

   WARNING! Before you start taking hard disks out of your NAS device, read the manual carefully. Incorrect actions may damage your network-attached storage and/or the hard disks within the RAID system.

2. Take the hard disks out of the NAS one by one, carefully removing them from their slots. Remember that the disks are extremely vulnerable: hitting or dropping them may result in serious physical damage.

3. Make sure to mark each hard disk in accordance with how they were installed inside the NAS.

4. Remove the hard disks and connect them to the computer. In this video, we have explored what ports are used to connect hard disks, and what to do if there are not enough ports or connectors.

   Go to view

   

   How to Order Remote Data Recovery

Restoring data with Hetman RAID Recovery

This program recovers data from damaged RAID arrays and is fully compatible with Promise Vess 1830i. The hard disks that make up the RAID contain technical information about the algorithm used to save files. When launched, Hetman RAID Recovery reads this information and puts the damaged array together. Then you can open the disk and save your files. Also, you can recover the files accidentally deleted from the network drive.

Go to view

How to recover data from a Promise

Vess 1830i has 16 HDD slots, and it supports the following array types:

• RAID 0;
• RAID 1;
• RAID 1E;
• RAID 3;
• RAID 5;
• RAID 6;
• RAID 30;
• RAID 50;
• RAID 60;
• JBOD;

NAS supports:

• exFAT, VFAT, FAT 12 / 16 / 32;
• NTFS / ReFS;
• APFS / HFS+;
• Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
• VMFS / HikvisionFS;

Safe recovery from disk images

This utility lets you save an entire copy of the disk to file and then work with this image instead of the actual disk. Such feature helps to protect data on the disk from:

• Overwriting during the recovery process;
• Loss resulting from bad sectors;
• User mistakes.

To create an image, do the following:

1. Make sure that you have enough free space to save the image. The image file size usually equals the disk size.

2. Select the disk in the main window, and choose from the menu Tools – Save Disk. You can select multiple disks to be saved.

3. When the image creation wizard starts, you can choose to save the entire disk or select only a part of it. Specify the parameters and click Next.

   

4. At this stage, you need to choose a directory where to save the image. Choose any disk connected to this PC, or save the image by FTP.

   

Where are user’s files stored?

The Promise Vess 1830i network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

Comparison of software for RAID recovery