Home NAS QNAP VS-8124U-RP Pro+ Data Recovery: Key Features and Benefits

Contents

• Why Regular Data Recovery Tools Can’t Restore Files from RAID
• Key Information About the NAS QNAP VS-8124U-RP Pro+
• How to Remove Hard Disks from Your NAS and Connect Them to a PC
  • Step-by-Step Data Recovery with Hetman RAID Recovery
  • How to Safely Recover Data from Disk Images
  • Where Are the User’s Files Actually Stored?
  • RAID Recovery Software: Detailed Comparison

Why Regular Data Recovery Tools Can’t Restore Files from RAID

Conventional hard drives store user data by writing it sequentially across the disk surface, which means an entire file is typically located on a single drive. In contrast, when data is written to a RAID array, each file is split into multiple fragments. These fragments are then distributed and written in sequence across all the drives in the array. Depending on the configuration, fragment sizes can range from 2 KB to 2 MB, so every file is physically stored across several disks at once.

This approach significantly increases read and write performance — after all, writing two halves of a 1 GB file to two drives simultaneously is much faster than writing the full 1 GB to a single disk. However, this same mechanism makes file recovery far more complex.

Different RAID levels use different methods to distribute and protect data. On top of that, manufacturers like QNAP often add their own proprietary structures and variations. As a result, data can be written to disks in many different formats, and each requires a specific approach during recovery.

Are there any recommended practices for off-site backup storage to prevent complete data loss in the event of a disaster?

Yes, there are several recommended practices for off-site backup storage to prevent complete data loss in the event of a disaster. Some of these practices include:

1. Regularly backup your data: Ensure that you have a regular backup schedule in place to ensure that your data is backed up frequently. This will minimize the amount of data lost in the event of a disaster.
2. Use multiple backup locations: It is recommended to have multiple off-site backup locations to store your data. This can include cloud storage, remote data centers, or physical off-site storage facilities. Having multiple locations reduces the risk of losing all backups in a single location.
3. Encrypt your backups: Encrypting your backups adds an extra layer of security, ensuring that even if your data is compromised during transit or storage, it remains secure and inaccessible to unauthorized individuals.
4. Test your backups regularly: Regularly test your backup and recovery processes to ensure that your data can be successfully restored. This will help identify any issues or shortcomings in your backup strategy and allow you to address them before a disaster occurs.
5. Implement a disaster recovery plan: Develop a comprehensive disaster recovery plan that outlines the steps to be taken in the event of a disaster. This plan should include details on how to retrieve and restore data from off-site backups.
6. Store backups in geographically separate locations: If possible, store backups in geographically separate locations to minimize the risk of losing data due to regional disasters such as earthquakes, floods, or fires.
7. Regularly review and update your backup strategy: Technology and business needs evolve over time, so it's important to regularly review and update your backup strategy to ensure it remains effective and aligned with your organization's requirements.

By following these recommended practices, you can significantly reduce the risk of complete data loss and ensure that your critical data is protected in the event of a disaster.

How to Remove Hard Disks from Your NAS and Connect Them to a PC

Although the NAS VS-8124U-RP Pro+ can be accessed over the network, you still need to remove its hard disks and connect them directly to a Windows PC. Only then can the recovery software properly scan and analyze the drives. Follow these steps:

1. Power off the NAS and disconnect it from the power source.

   WARNING! Before removing any drives, carefully read the device manual. Improper actions may damage both the NAS enclosure and the hard disks in the RAID array.

2. Remove the hard disks one by one, gently sliding each drive out of its slot. Remember that hard disks are highly sensitive: any impact or drop can cause serious physical damage.

3. Label each hard disk according to its position inside the NAS. The order of the drives is crucial for correct RAID reconstruction.

4. Connect the drives to your computer. In this video, we explain which ports you can use to connect hard disks and what to do if your PC does not have enough free connectors.

   Go to view

   

   How to Order Remote Data Recovery

Step-by-Step Data Recovery with Hetman RAID Recovery

This program restores data from damaged RAID arrays and is fully compatible with QNAP VS-8124U-RP Pro+. Each hard disk in the array contains technical metadata describing how files were written. When launched, Hetman RAID Recovery analyzes this metadata, automatically reconstructs the damaged array, and provides access to its contents. After that, you can browse the recovered disk and save your files. The program can also restore files that were accidentally deleted from the network drive.

Go to view

How to recover data from a QNAP

VS-8124U-RP Pro+ has 8 HDD slots, and it supports the following array types:

• RAID 50;
• RAID 60;
• RAID 6;
• RAID 5;
• RAID 10;
• RAID 0;
• RAID 1;
• JBOD;

NAS supports:

• ZFS;
• EXT4;
• EXT3;
• exFAT;
• FAT32 (External Disk Only);
• NTFS (External Disk Only);
• HFS+ (External Disk Read Only);

How to Safely Recover Data from Disk Images

This utility allows you to create a complete copy of a disk and work with the disk image instead of the physical drive. This approach helps protect your data from:

• Overwriting during the recovery process;
• Additional data loss caused by bad sectors;
• User errors.

To create a disk image, follow these steps:

1. Ensure you have enough free space to store the image. Its size will typically match the size of the original disk.

2. In the main window, select the target disk and choose Tools - Save Disk. You can also select multiple disks if needed.

3. When the Image Creation Wizard opens, select whether you want to save the entire disk or only a specific region. Adjust the settings and click Next.

   

4. Choose the directory where the image will be saved. You may select any available disk connected to your PC or upload the image via FTP.

   

Where Are the User’s Files Actually Stored?

The QNAP VS-8124U-RP Pro+ network-attached storage keeps QTS (QuTS hero) operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

RAID Recovery Software: Detailed Comparison