What are the common causes of physical damage to an SSD Silicon Power, and how likely is it to result in permanent data loss?

The common causes of physical damage to an SSD (Solid State Drive) like Silicon Power can include:Impact or dropping: Accidental drops or physical impact can cause damage to the internal components of an SSD, such as the NAND flash memory chips or the controller.Electrical surges or power spikes: Sudden power surges or spikes can damage the SSD's circuitry, rendering it inoperable.Excessive heat: SSDs can overheat if they are not adequately cooled, leading to potential damage to the internal components.Water or liquid damage: Exposure to water or other liquids can cause a short circuit or corrosion of the SSD's components.Manufacturing defects: In rare cases, manufacturing defects can lead to physical damage to the SSD.The likelihood of permanent data loss due to physical damage to an SSD depends on the severity of the damage. In some cases, the damage may be minimal, and data recovery specialists might be able to retrieve the data. However, severe physical damage, such as a broken NAND chip or controller, can result in permanent data loss. It is always recommended to regularly backup your data to minimize the risk of permanent loss in case of any physical damage to the SSD.

Are there any specific types of physical damage to an SSD Silicon Power that are more likely to cause permanent data loss compared to others?

There are several types of physical damage that can potentially cause permanent data loss in an SSD (Solid State Drive), including:Electrical damage: Power surges or electrical faults can damage the SSD's electronic components, leading to data loss.Water damage: Exposure to water or other liquids can cause short circuits and damage the SSD's circuitry, resulting in data loss.Excessive heat: High temperatures can cause the SSD's components to malfunction or even melt, leading to data loss.Physical impact: Dropping or mishandling the SSD can cause physical damage to the internal components, resulting in data loss.Manufacturing defects: In rare cases, manufacturing defects may cause the SSD to fail, leading to permanent data loss.It's important to note that while these types of physical damage can potentially cause data loss, SSDs are generally more resilient than traditional hard disk drives (HDDs) due to their lack of moving parts. However, it's always recommended to have regular backups of important data to mitigate the risk of permanent data loss.

Is it possible to recover data from an SSD Silicon Power that has suffered physical damage, and what are the potential methods or techniques used for data recovery in such cases?

Recovering data from an SSD (Solid State Drive) that has suffered physical damage can be challenging, but it is not entirely impossible. Here are some potential methods or techniques that can be used for data recovery in such cases:Contact a professional data recovery service: The best option is to seek help from a professional data recovery service that specializes in SSD recovery. They have the expertise, tools, and cleanroom facilities required to handle physical damage and attempt recovery.Repair the damaged components: If the physical damage is limited to certain components of the SSD, it may be possible to repair or replace those components to get the drive working again. This requires specialized knowledge and equipment, so it is best left to professionals.Clone the damaged SSD: In some cases, the SSD may still be partially functional, allowing for a cloning process. This involves creating an exact copy (or clone) of the damaged SSD onto a healthy drive. The cloning process can bypass the damaged areas and potentially retrieve the data.Chip-off recovery: If the SSD's controller or other critical components are damaged, chip-off recovery may be attempted. This involves removing the NAND flash memory chips from the SSD and accessing the data directly from them. It is a complex and delicate procedure that requires specialized equipment and expertise.Data recovery from backups: If you have regular backups of your data, it is always recommended to restore from those backups. This is often the easiest and most reliable way to recover data, especially if the SSD has suffered physical damage.Remember, attempting DIY data recovery on a physically damaged SSD can lead to further damage or data loss. It is advisable to consult with professional data recovery experts who can assess the situation and provide the best possible solution.

SSD Silicon Power Data Recovery in 2024

Contents

The Program For Recovering Silicon Power SSD Data
Recover Data From Silicon Power SSD After Formatting or Deleting Partition
SMART Parameters Of Silicon Power SSD
Restore File System On Silicon Power SSD
- File System In Silicon Power SSD Is Recognized as RAW
- Run CHKDSK Command
Restore Partitions On Silicon Power SSD With “Diskpart” Command
Find Bad Sectors And Errors, Run The Defragmentation
- Scan The Disk For Errors And Bad Sectors Snd Correct Them
- Run Disk Defragmentation
Repairing Silicon Power SSD
Creating Backup Copy Of Silicon Power SSD

If you need to recover an internal or external hard disk (HDD, SSD or SSHD), a memory card or a USB pen drive, the first step is to connect it to a computer. If you want to recover data from a dashboard camera, phone, camera, or a music player, you should remove their memory card and connect it to a desktop computer. Also, you can try this tutorial for internal phone storage, if you connect your phone to a computer and it displays your device in This PC folder as a USB drive.

The Program For Recovering Silicon Power SSD Data

Are you looking for a way to recover data?

If files have been deleted from a Silicon Power SSD, and it is impossible to recover them by using standard tools of your operating system, the most effective way will be to use Hetman Partition Recovery.

Partition Recovery™ 4.9

The tool recovers data from any devices, regardless of the cause of data loss.

Download

For this purpose, do the following:

Download the program install and launch it.
By default, users are suggested to start with File Recovery Wizard. Click «Next» and the program will ask you to select the disk you want to recover your files from.
Double-click on the disk and select analysis type. Choose «Full analysis» and wait for the disk scanning procedure to finish.
When the scanning is over, you will be show files for recovery. Select the ones you need and click «Recover».
Select one of the options to save files. Do not save the recovered files to the disk from where they have been deleted previously because they can be erased.

The Program For Recovering Silicon Power SSD Data

Go to view

How to Recover Deleted Files With Hetman Partition Recovery Software

Recover Data From Silicon Power SSD After Formatting or Deleting Partition

Recover Files After Formatting

Are you looking for a way to recover files from a Silicon Power SSD after formatting? Follow this guide:

Download Hetman Partition Recovery, install and launch it. After launch, the program will find and display all physical disks as well as available and unavailable partitions and areas on your disks, showing this information in the left part of the main window.
Double-click on the disk or the area from which you need to recover files and select analysis type.
Choose «Full analysis» and wait for the disk scanning procedure to finish.
When the scanning is over, you will be show files for recovery. Select the ones you need and click «Recover».
Select one of the options to save files. Do not save the recovered files to the disk from where they have been deleted previously because they can be erased.

Recover Data From Deleted Partition

Are you looking for a way to recover files from a deleted partition in a Silicon Power SSD? Follow this guide:

Download Hetman Partition Recovery, install and launch it. After launch, the program will find and display all physical disks, flash drives or memory cards in the left part of the main window. The list of physical devices is shown after logical drives
Double-click on the device from where a partition was deleted.
Choose «Full analysis» and wait for the disk scanning procedure to finish.
When the scanning is over, you will be shown files for recovery. Select the ones you need and click «Recover».
Select one of the options to save files. Do not save the recovered files to the disk from where they have been deleted previously because they can be erased.

Recover System Partition With LiveCD

If there is no possibility to connect a hard disk with a lost or damaged system partition to another computer, you can recover such partition by starting your computer with LiveCD, an alternative portable version of an operating system. For this purpose, do the following:

Find a LiveCD which is good enough for your needs, download it and copy it to a CD\DVD or a flash drive.
Connect the LiveCD to your computer and turn it on. The computer will reboot automatically with the LiveCD.
Copy files from the system partition to another media (often it can be an external hard disk).

Recover System Partition Data on Another Computer

If the system partition is lost, a computer will not boot. That is why:

Take out of the computer or disconnect the hard disk where the system partition was lost.
Connect this HDD to another computer.
Make sure that your hard disk is recognized by the other computer correctly.
Now, follow the steps as shown in the previous section.

Go to view

How to Recover Data After Formatting, Deleting or Creating Partitions

SMART Parameters Of Silicon Power SSD

Large hard disk manufacturers include S.M.A.R.T. technology into their products. S.M.A.R.T. analyzes a great number of mechanical attributes. This analysis allows detecting hard disk errors before it breaks down completely, and it can also help to find out why it happened.

In spite of S.M.A.R.T. ability to predict future problems, most of them cannot be prevented. Therefore, S.M.A.R.T. is a technology which often warns users of the hard disk nearing its end. S.M.A.R.T. values cannot be corrected and there is no need to waste time on that.

Every hard disk manufacturer sets a threshold value for every operation. Under normal circumstances, threshold values are never exceeded. Otherwise, we encounter errors.

There are 256 values, each having its own ID. Some errors and extreme values are critical. There is no solution for such errors. The only way out for them is to replace the hard disk as soon as such error is detected.

There are no methods to correct critical SMART errors. If the hard disk is not replaced, the error will be displayed again and again. The only justified reason for still keeping the disk will be the need to save data from the sectors which are still available. If the error warning comes true, the disk will become unavailable for any program known. That is why there are steps to be taken to save your data.

Go to view

How to Use Victoria to Test and Fix Your Hard Disk

Restore File System On Silicon Power SSD

If it is impossible to recognize the file system on Silicon Power SSD, hard disk, format the device.

File System In Silicon Power SSD Is Recognized as RAW

Sometimes the operating system cannot recognize the file system structure (for example, FAT or NTFS). If you check properties of such device, its file system will be identified as RAW. In this case, Windows suggests formatting the disk.

There are utilities specialized in restoring RAW disks, but we recommend using a versatile solution, Hetman Partition Recovery. This function is an additional component, so you only have to launch the program and analyze such disk.

Go to view

How to Fix Flash Drive Errors: The Drive Can’t Be Recognized, Wrong Size, RAW File System

Run CHKDSK Command

In some cases, the file system on a Silicon Power SSD can be repaired with the command CHKDSK.

Launch the Command prompt as Administrator.
Type in the command “chkdsk D: /f” (instead of D: type in the letter of the corresponding disk) and press ENTER.
As you launch the command, the process of error checking and correcting will start; it can help to restore your file system back to normal.

Go to view

How to Check Your Hard Disk for Errors and Fix Them in Windows 10

Restore Partitions On Silicon Power SSD With “Diskpart” Command

If a USB drive, a memory card or another media work incorrectly, cleaning the disk and its partitions with the command “Clean” and Diskpart tool can become one of the ways to solve the problem. This tool can correct errors if the device cannot be formatted or when its size is identified incorrectly.

Launch the Command prompt as Administrator.
Run the command DISKPART.
Show the list of disks with the command LIST DISK and find the number of the disk which you need to recover.
Select the disk you need: SELECT DISK # (instead of # enter the disk number).
Run the command CLEAN.
Create a partition in the cleaned disk and format it into the file system you like.

Go to view

How to Fix Flash Drive Errors: The Drive Can’t Be Recognized, Wrong Size, RAW File System

Find Bad Sectors And Errors, Run The Defragmentation

Scan The Disk For Errors And Bad Sectors Snd Correct Them

Check all partitions of the hard disk and try to correct the mistakes which have been found. For this purpose, do the following:

Open the folder «This PC».
Right-click on the disk containing an error.
Select Properties / Tools / Check now (in the tab Error-checking).

As a result of scanning, the errors found on the disk can be corrected.

Go to view

How to Check Your Hard Disk for Errors and Fix Them in Windows 10

Run Disk Defragmentation

Open the folder «This PC» and right-click on the disk.
Select Properties / Tools / Optimize (in the tab Optimization and defragmentation).
Select the disk you need to optimize and click Optimize.

Note. In Windows 10 defragmentation/optimization can be scheduled so that it is performed automatically.

Go to view

How to Defragment Your PC's Hard Drive on Windows 10

Repairing Silicon Power SSD

It is important to understand that any of the ways to eliminate errors in a Silicon Power SSD hard disk is only a virtual solution to the problem. Often it is impossible to remove the cause of the error completely, because the device needs repairing.

You can go to a service center to fix the breakage or replace parts/microchips of a Silicon Power SSD. Yet in this case the cost of works will be several times as expensive as buying a disk or memory card. So this step is only worth taking if you need to recover very important data.

Creating Backup Copy Of Silicon Power SSD

There are several solutions to create data backup copies:

Applications built into the operating system. Microsoft Windows offers methods of data backup that suggest saving files and data to external or intrernal (built-in) media storages. All modern versions of Windows are already equipped the fuction of creating a backup copy of certain files or the entire hard disk if necessary. The functions offered by Windows are comprehensive and self-sufficient, and they are meant to be convenient enough so that you do not go looking for third-party services or software.
Manual backup. You can always use the good old method of creating a backup copy by manually copying the data to an external medium. it is a long process but if you work with small amounts of data, such solution can be acceptable for you.
Online services. Recently the most up-to-date way of data backup is becoming popular, represented by numerous online services. These are companies that provide backup for your files right on the Internet. A small background application installed on your computer creates copies of thnecessary data and saves them to a remote server. However, the space allowed for storing files in a free version is too small to use this method as a complex solution. Often this space is under 10 Gb so there is no way to create a backup copy of the entire hard disk. Such services are more practical when things come to backing up a series of files.
Creating a disk image. This is the most comprehensive solution to create a backup copy which is preferred by advanced users. This method suggests using a third-party program to create a backup copy of the entire disk which can be used on another information-carrying medium if necessary. With this solution, you can get access to all data which was there on the disk at the time of copying - documents, software and media files - within a short period of time.

Go to view

How to Set Up and Configure File History in Windows 10, 8

Models SSD Silicon Power:

Slim;
Velox;
M10;

How to recover data from a SSD Silicon Power

SSD Silicon Power Data Recovery in 2024

The Program For Recovering Silicon Power SSD Data