How to Fix Induced Op-Vibration Detection (0xBA) S.M.A.R.T. Error?

If there is a SMART error, restoring data from the disk is not always necessary. In case of an error, it is recommended to create a backup copy of important information immediately, because now the disk can fail completely at any time. However, there are errors that make data copying impossible. In this case, you can use special hard disk data recovery software - Hetman Partition Recovery.

To do it:

1. Download the program, install and launch it.
2. By default, you will be suggested to use File Recovery Wizard. After clicking Next the program will suggest you to choose a disk to recover files from.
3. Double-click on the faulty disk and choose the type of analysis. Select Full analysis and wait for the scanning process to finish.
4. After the scanning process is over you will be shown files for recovery. Select the necessary files and click Recover.
5. Select one of the suggested ways to save files. Do not save the recovered files to the disk having an error "0xBA Induced Op-Vibration Detection".

Download Data Recovery Software

Sometimes a SMART error can be caused by exceeding the maximum temperature of the disk. This problem can be eliminated by improving the case ventilation. First of all, make sure that your computer has sufficient ventilation and that all coolers are in proper working order.

If you found and eliminated the ventilation problem, which helped to bring the disk temperature back to normal, this SMART error can never appear again.

Open This PC and right-click on the disk having an error "0xBA Induced Op-Vibration Detection". Select Properties / Tools / Optimize in the tab Optimize and defragment drive.

Select the disk you need to optimize and click Optimize.

Note. In Windows 10 disk defragmentation and optimization can be adjusted to take place automatically.

Is It Worth Repairing an HDD?

It is important to realize that any of the ways to eliminate a SMART error is self-deception. It is impossible to completely remove the cause of the error, as it often involves physical wear of the hard disk mechanism.

To replace the hard disk components which operate incorrectly you can go to a service center or a special laboratory dealing with hard disks.

However, the cost of work will be higher than the price of a new device, so it is justified only when you need to restore data from a disk which is no longer operable.

How to choose a new HDD?

If you encounter a hard disk SMART error, then buying a new HDD is only a matter of time. The disk type you need depends on how you work on the computer and the purposes you use your computer for.

Here are some points to consider when buying a new hard disk:

1. Disk type: HDD, SSD или SSHD. Each type has its advantages and disadvantages which may be unimportant for one user and crucial for another. These are read and write speed, capacity and tolerance to multiple overwriting.
2. Size. There are two main form factors for hard disks, 3.5 inch and 2.5 inch. The size of disks is determined in accordance to the slot in a particular computer or laptop.
3. Interface. The main interfaces of hard disks are as follows:
   • SATA;
   • IDE, ATAPI, ATA;
   • SCSI;
   • External Disk (USB, FireWire etc).
4. Technical characteristics and performance:
   • Capacity;
   • Read and write speed;
   • Memory cache size;
   • Response time;
   • Fail safety.
5. S.M.A.R.T. Availability of this technology in the disk will help determining possible mistakes in its work and prevent loss of data before it is too late.
6. Package. This item can include interface or power cables as well as warranty and service options.