- Why can’t ordinary software tools restore files from RAID?
- How to take hard disks out of the NAS and connect them to a PC?
Why can’t ordinary software tools restore files from RAID?
Conventional hard disks keep user’s data by writing it to their surface in a consecutive way, and this is how an entire file is stored on a single hard disk. However, when data is written to a RAID system, a file is divided into several parts. Then these parts are written consecutively to all hard disks within such array. The size of such parts may range from 2 KB to 2 MB, so each file is stored on several hard disks at the same time.
Such approach helps to speed up read and write operations, and it is evident that saving two parts of a file having the size of 1 GB to two hard disks simultaneously is much faster than saving the same 1 GB of data to one hard disk. However, this peculiarity makes file recovery more complicated.
Various RAID levels store information in different ways. Additionally, manufacturers like Buffalo also introduce some modifications to this process, and that is why data can be written to hard disk in a wide variety of ways.
What are the common causes of data loss in NAS Buffalo Drive Station HD-LB3.0TU3 devices?
There can be several common causes of data loss in NAS Buffalo Drive Station HD-LB3.0TU3 devices. Some of them include:
- Hardware failure: This can occur due to issues with the hard drive, power supply, or other internal components of the device. If any of these components fail, it can lead to data loss.
- Accidental deletion: Users may accidentally delete important files or folders from the NAS device, resulting in data loss. This can happen due to human error or mistakenly selecting the wrong files for deletion.
- File system corruption: The file system on the NAS device can become corrupted due to various reasons such as improper shutdown, power outages, or software bugs. When the file system gets corrupted, it can result in data loss or inaccessibility of files.
- Virus or malware attacks: If the NAS device gets infected with viruses or malware, it can corrupt or delete files, leading to data loss. Malicious software can also encrypt files and demand ransom for their recovery.
- Power surges or electrical issues: Power surges or electrical problems can damage the NAS device and its components, causing data loss. Sudden power outages or fluctuations can interrupt ongoing read/write operations and corrupt the data.
- User error during firmware updates: If the user makes a mistake or encounters an issue while updating the firmware of the NAS device, it can result in data loss or make the device inoperable.
- Physical damage or mishandling: Dropping the NAS device, exposing it to extreme temperatures, or mishandling it in any way can lead to physical damage to the hard drive or other components, resulting in data loss.
It is important to regularly back up the data from NAS devices to other storage mediums to minimize the risk of data loss.
How to take hard disks out of the NAS and connect them to a PC?
Although NAS Drive Station HD-LB3.0TU3 can be accessed over the network, you still need to take the hard disks out of the storage device and connect them to a Windows computer. Only in this case will the software be able to scan them properly. Here is what you should do:
-
Turn off the storage and disconnect it from the power supply.
WARNING! Before you start taking hard disks out of your NAS device, read the manual carefully. Incorrect actions may damage your network-attached storage and/or the hard disks within the RAID system.
-
Take the hard disks out of the NAS one by one, carefully removing them from their slots. Remember that the disks are extremely vulnerable: hitting or dropping them may result in serious physical damage.
-
Make sure to mark each hard disk in accordance with how they were installed inside the NAS.
-
Remove the hard disks and connect them to the computer. In this video, we have explored what ports are used to connect hard disks, and what to do if there are not enough ports or connectors.
Go to view
Restoring data with Hetman RAID Recovery
This program recovers data from damaged RAID arrays and is fully compatible with Buffalo Drive Station HD-LB3.0TU3. The hard disks that make up the RAID contain technical information about the algorithm used to save files. When launched, Hetman RAID Recovery reads this information and puts the damaged array together. Then you can open the disk and save your files. Also, you can recover the files accidentally deleted from the network drive.
How to recover data from a Buffalo
Drive Station HD-LB3.0TU3 has 1 HDD slots, and it supports the following array types:
- RAID 0;
- RAID 1;
- JBOD;
NAS supports:
- exFAT, VFAT, FAT 12 / 16 / 32;
- NTFS / ReFS;
- APFS / HFS+;
- Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
- VMFS / HikvisionFS;
Safe recovery from disk images
This utility lets you save an entire copy of the disk to file and then work with this image instead of the actual disk. Such feature helps to protect data on the disk from:
- Overwriting during the recovery process;
- Loss resulting from bad sectors;
- User mistakes.
To create an image, do the following:
-
Make sure that you have enough free space to save the image. The image file size usually equals the disk size.
-
Select the disk in the main window, and choose from the menu Tools – Save Disk. You can select multiple disks to be saved.
-
When the image creation wizard starts, you can choose to save the entire disk or select only a part of it. Specify the parameters and click Next.
-
At this stage, you need to choose a directory where to save the image. Choose any disk connected to this PC, or save the image by FTP.
Where are user’s files stored?
The Buffalo Drive Station HD-LB3.0TU3 network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.
Comparison of software for RAID recovery
| Product | Operating system | License type | RAID controller support | Supported file systems | Virtual RAID controller support | Data recovery from damaged RAID | File preview |
|---|---|---|---|---|---|---|---|
| Hetman RAID Recovery | Windows | Paid | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| DiskInternals RAID Recovery | Windows | Paid | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| R-Studio | Windows, Mac, Linux | Paid | Yes, over 200 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| UFS Explorer RAID Recovery | Windows, Mac, Linux | Paid | Yes, over 1,000 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| EaseUS Data Recovery | Windows | Paid | Yes, over 20 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| ReclaiMe Free RAID Recovery | Windows | Free | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
No, data recovery cannot be done from a NAS Buffalo Drive Station HD-LB3.0TU3 device if the storage disks have been physically removed or replaced. The data recovery process typically involves accessing the original storage media to retrieve lost or deleted data. If the disks have been removed or replaced, the original data may no longer be accessible, making data recovery impossible.