Recovering Files from RAID Without NAS Buffalo TeraStation TS5600D1206 On

Contents

• Why can’t ordinary software tools restore files from RAID?
• How to take hard disks out of the NAS and connect them to a PC?
  • Restoring data with Hetman RAID Recovery
  • Safe recovery from disk images
  • Where are user’s files stored?
  • Comparison of software for RAID recovery

Why can’t ordinary software tools restore files from RAID?

Conventional hard disks keep user’s data by writing it to their surface in a consecutive way, and this is how an entire file is stored on a single hard disk. However, when data is written to a RAID system, a file is divided into several parts. Then these parts are written consecutively to all hard disks within such array. The size of such parts may range from 2 KB to 2 MB, so each file is stored on several hard disks at the same time.

Such approach helps to speed up read and write operations, and it is evident that saving two parts of a file having the size of 1 GB to two hard disks simultaneously is much faster than saving the same 1 GB of data to one hard disk. However, this peculiarity makes file recovery more complicated.

Various RAID levels store information in different ways. Additionally, manufacturers like Buffalo also introduce some modifications to this process, and that is why data can be written to hard disk in a wide variety of ways.

How can regular data verification or checksum processes help maintain data integrity on NAS Buffalo TeraStation TS5600D1206 devices?

Regular data verification or checksum processes can help maintain data integrity on NAS Buffalo TeraStation TS5600D1206 devices in the following ways:

1. Detecting data corruption: Regular data verification or checksum processes involve checking the integrity of data by comparing it to a reference checksum value. This helps in detecting any changes or corruption in the data stored on the TeraStation device.
2. Preventing silent data corruption: Silent data corruption refers to errors that occur during the storage or retrieval of data without any notification or error message. By regularly verifying data using checksum processes, any silent data corruption can be identified and rectified before it leads to data loss or other issues.
3. Ensuring data consistency: Data verification processes help ensure that the data stored on the TeraStation device remains consistent and accurate. By comparing the stored data with the reference checksum, any inconsistencies or errors can be identified and resolved promptly.
4. Early detection of disk errors: Regular data verification processes can also help in early detection of disk errors or failures. By comparing the checksum of the data on the TeraStation device with the reference value, any discrepancies can indicate potential issues with the underlying storage disks.
5. Maintaining data reliability: By regularly verifying data integrity, the TeraStation device can ensure the reliability of the stored data. This is particularly important for critical or sensitive data that needs to be protected from corruption or unauthorized modifications.

It is important to note that the specific steps for implementing data verification or checksum processes may vary depending on the NAS device's configuration and the software or tools used. It is recommended to refer to the manufacturer's documentation or seek assistance from technical support for detailed instructions on implementing data verification processes on the Buffalo TeraStation TS5600D1206.

How to take hard disks out of the NAS and connect them to a PC?

Although NAS TeraStation TS5600D1206 can be accessed over the network, you still need to take the hard disks out of the storage device and connect them to a Windows computer. Only in this case will the software be able to scan them properly. Here is what you should do:

1. Turn off the storage and disconnect it from the power supply.

   WARNING! Before you start taking hard disks out of your NAS device, read the manual carefully. Incorrect actions may damage your network-attached storage and/or the hard disks within the RAID system.

2. Take the hard disks out of the NAS one by one, carefully removing them from their slots. Remember that the disks are extremely vulnerable: hitting or dropping them may result in serious physical damage.

3. Make sure to mark each hard disk in accordance with how they were installed inside the NAS.

4. Remove the hard disks and connect them to the computer. In this video, we have explored what ports are used to connect hard disks, and what to do if there are not enough ports or connectors.

   Go to view

   

   How to Order Remote Data Recovery

Restoring data with Hetman RAID Recovery

This program recovers data from damaged RAID arrays and is fully compatible with Buffalo TeraStation TS5600D1206. The hard disks that make up the RAID contain technical information about the algorithm used to save files. When launched, Hetman RAID Recovery reads this information and puts the damaged array together. Then you can open the disk and save your files. Also, you can recover the files accidentally deleted from the network drive.

Go to view

How to recover data from a Buffalo

TeraStation TS5600D1206 has 6 HDD slots, and it supports the following array types:

• RAID 0;
• RAID 1;
• RAID 5;
• RAID 6;
• JBOD;

NAS supports:

• exFAT, VFAT, FAT 12 / 16 / 32;
• NTFS / ReFS;
• APFS / HFS+;
• Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
• VMFS / HikvisionFS;

Safe recovery from disk images

This utility lets you save an entire copy of the disk to file and then work with this image instead of the actual disk. Such feature helps to protect data on the disk from:

• Overwriting during the recovery process;
• Loss resulting from bad sectors;
• User mistakes.

To create an image, do the following:

1. Make sure that you have enough free space to save the image. The image file size usually equals the disk size.

2. Select the disk in the main window, and choose from the menu Tools – Save Disk. You can select multiple disks to be saved.

3. When the image creation wizard starts, you can choose to save the entire disk or select only a part of it. Specify the parameters and click Next.

   

4. At this stage, you need to choose a directory where to save the image. Choose any disk connected to this PC, or save the image by FTP.

   

Where are user’s files stored?

The Buffalo TeraStation TS5600D1206 network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

Comparison of software for RAID recovery