- Why can’t ordinary software tools restore files from RAID?
- How to take hard disks out of the NAS and connect them to a PC?
Why can’t ordinary software tools restore files from RAID?
Conventional hard disks keep user’s data by writing it to their surface in a consecutive way, and this is how an entire file is stored on a single hard disk. However, when data is written to a RAID system, a file is divided into several parts. Then these parts are written consecutively to all hard disks within such array. The size of such parts may range from 2 KB to 2 MB, so each file is stored on several hard disks at the same time.
Such approach helps to speed up read and write operations, and it is evident that saving two parts of a file having the size of 1 GB to two hard disks simultaneously is much faster than saving the same 1 GB of data to one hard disk. However, this peculiarity makes file recovery more complicated.
Various RAID levels store information in different ways. Additionally, manufacturers like Digiever also introduce some modifications to this process, and that is why data can be written to hard disk in a wide variety of ways.
How can quality of service (QoS) settings impact data transfer reliability on NAS Digiever DS-645256-RM Pro+ devices?
Quality of Service (QoS) settings can have a significant impact on data transfer reliability on NAS Digiever DS-645256-RM Pro+ devices. Here are a few ways QoS settings can affect data transfer reliability:
- Bandwidth allocation: QoS settings allow you to allocate bandwidth to different applications or services based on their priority. By prioritizing data transfer protocols or applications, you can ensure that critical data transfers receive sufficient bandwidth, reducing the chances of congestion or packet loss.
- Traffic shaping: QoS settings enable traffic shaping, which allows you to control and regulate the flow of data packets. By shaping the traffic, you can prevent network congestion and prioritize certain types of data transfers, ensuring reliable and consistent data transfer rates.
- Latency management: QoS settings can help manage latency, which is the delay between sending and receiving data packets. By prioritizing real-time data transfers or reducing latency for critical applications, you can improve the reliability of time-sensitive data transfers.
- Error handling: QoS settings can include error handling mechanisms that detect and recover from transmission errors. By implementing error detection and correction techniques, you can enhance the reliability of data transfers, minimizing the chances of data corruption or loss.
- Traffic prioritization: QoS settings allow you to prioritize certain types of traffic over others. For example, you can prioritize data transfers related to critical business operations over non-essential traffic like file downloads or streaming. This ensures that important data transfers are given higher priority, improving their reliability.
By configuring QoS settings appropriately on NAS Digiever DS-645256-RM Pro+ devices, you can optimize data transfer reliability, reduce network congestion, and ensure that critical data transfers are prioritized and delivered efficiently.
How to take hard disks out of the NAS and connect them to a PC?
Although NAS DS-645256-RM Pro+ can be accessed over the network, you still need to take the hard disks out of the storage device and connect them to a Windows computer. Only in this case will the software be able to scan them properly. Here is what you should do:
-
Turn off the storage and disconnect it from the power supply.
WARNING! Before you start taking hard disks out of your NAS device, read the manual carefully. Incorrect actions may damage your network-attached storage and/or the hard disks within the RAID system.
-
Take the hard disks out of the NAS one by one, carefully removing them from their slots. Remember that the disks are extremely vulnerable: hitting or dropping them may result in serious physical damage.
-
Make sure to mark each hard disk in accordance with how they were installed inside the NAS.
-
Remove the hard disks and connect them to the computer. In this video, we have explored what ports are used to connect hard disks, and what to do if there are not enough ports or connectors.
Go to view
Restoring data with Hetman RAID Recovery
This program recovers data from damaged RAID arrays and is fully compatible with Digiever DS-645256-RM Pro+. The hard disks that make up the RAID contain technical information about the algorithm used to save files. When launched, Hetman RAID Recovery reads this information and puts the damaged array together. Then you can open the disk and save your files. Also, you can recover the files accidentally deleted from the network drive.
How to recover data from a Digiever
DS-645256-RM Pro+ has 60 HDD slots, and it supports the following array types:
- RAID 0;
- RAID 1;
- RAID 5;
- RAID 6;
- RAID 50;
- RAID 60;
- JBOD;
NAS supports:
- exFAT, VFAT, FAT 12 / 16 / 32;
- NTFS / ReFS;
- APFS / HFS+;
- Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
- VMFS / HikvisionFS;
Safe recovery from disk images
This utility lets you save an entire copy of the disk to file and then work with this image instead of the actual disk. Such feature helps to protect data on the disk from:
- Overwriting during the recovery process;
- Loss resulting from bad sectors;
- User mistakes.
To create an image, do the following:
-
Make sure that you have enough free space to save the image. The image file size usually equals the disk size.
-
Select the disk in the main window, and choose from the menu Tools – Save Disk. You can select multiple disks to be saved.
-
When the image creation wizard starts, you can choose to save the entire disk or select only a part of it. Specify the parameters and click Next.
-
At this stage, you need to choose a directory where to save the image. Choose any disk connected to this PC, or save the image by FTP.
Where are user’s files stored?
The Digiever DS-645256-RM Pro+ network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.
Comparison of software for RAID recovery
| Product | Operating system | License type | RAID controller support | Supported file systems | Virtual RAID controller support | Data recovery from damaged RAID | File preview |
|---|---|---|---|---|---|---|---|
| Hetman RAID Recovery | Windows | Paid | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| DiskInternals RAID Recovery | Windows | Paid | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| R-Studio | Windows, Mac, Linux | Paid | Yes, over 200 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| UFS Explorer RAID Recovery | Windows, Mac, Linux | Paid | Yes, over 1,000 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| EaseUS Data Recovery | Windows | Paid | Yes, over 20 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| ReclaiMe Free RAID Recovery | Windows | Free | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
Data recovery from a NAS device like Digiever DS-645256-RM Pro+ can still be possible even if the device is experiencing network congestion or bandwidth issues. However, the success of the data recovery process may depend on the severity of the congestion or bandwidth issues and the specific circumstances.
Here are a few factors to consider:
It is important to note that if the NAS device is experiencing hardware failures or other issues unrelated to network congestion, data recovery may require professional assistance to diagnose and resolve the underlying problem.