- Why Regular Data Recovery Tools Can’t Restore Files from RAID
- Key Information About the NAS Digiever MN-2125 Pro+
- How to Remove Hard Disks from Your NAS and Connect Them to a PC
Why Regular Data Recovery Tools Can’t Restore Files from RAID
Conventional hard drives store user data by writing it sequentially across the disk surface, which means an entire file is typically located on a single drive. In contrast, when data is written to a RAID array, each file is split into multiple fragments. These fragments are then distributed and written in sequence across all the drives in the array. Depending on the configuration, fragment sizes can range from 2 KB to 2 MB, so every file is physically stored across several disks at once.
This approach significantly increases read and write performance — after all, writing two halves of a 1 GB file to two drives simultaneously is much faster than writing the full 1 GB to a single disk. However, this same mechanism makes file recovery far more complex.
Different RAID levels use different methods to distribute and protect data. On top of that, manufacturers like Digiever often add their own proprietary structures and variations. As a result, data can be written to disks in many different formats, and each requires a specific approach during recovery.
Are there any limitations or restrictions on file or folder names that can cause potential data loss on NAS Digiever MN-2125 Pro+ devices?
There are some limitations and restrictions on file and folder names that can potentially cause data loss on NAS Digiever MN-2125 Pro+ devices. Here are a few examples:
- File and folder names containing special characters: Using special characters such as *, ?, /, , |, " in file or folder names can cause issues with the file system and may result in data loss. It is recommended to avoid using these characters.
- File and folder names exceeding the maximum length: Most file systems have a maximum limit on the length of file and folder names. If you exceed this limit, it may lead to data loss or corruption. It is advisable to keep the names within the specified limits.
- File and folder names with reserved words: Certain words are reserved by the operating system or file system, and using them as file or folder names can cause conflicts and data loss. Examples of reserved words include CON, PRN, AUX, NUL, COM1, COM2, LPT1, LPT2, etc.
- File and folder names with trailing spaces or periods: Having trailing spaces or periods at the end of file or folder names can cause issues on some file systems and result in data loss. It is best to avoid using these.
To prevent potential data loss, it is recommended to follow best practices for naming files and folders, such as using alphanumeric characters, avoiding special characters, keeping names within the specified limits, and avoiding reserved words. Additionally, regularly backing up your data is crucial to mitigate any potential data loss risks.
How to Remove Hard Disks from Your NAS and Connect Them to a PC
Although the NAS MN-2125 Pro+ can be accessed over the network, you still need to remove its hard disks and connect them directly to a Windows PC. Only then can the recovery software properly scan and analyze the drives. Follow these steps:
-
Power off the NAS and disconnect it from the power source.
WARNING! Before removing any drives, carefully read the device manual. Improper actions may damage both the NAS enclosure and the hard disks in the RAID array.
-
Remove the hard disks one by one, gently sliding each drive out of its slot. Remember that hard disks are highly sensitive: any impact or drop can cause serious physical damage.
-
Label each hard disk according to its position inside the NAS. The order of the drives is crucial for correct RAID reconstruction.
-
Connect the drives to your computer. In this video, we explain which ports you can use to connect hard disks and what to do if your PC does not have enough free connectors.
Go to view
Step-by-Step Data Recovery with Hetman RAID Recovery
This program restores data from damaged RAID arrays and is fully compatible with Digiever MN-2125 Pro+. Each hard disk in the array contains technical metadata describing how files were written. When launched, Hetman RAID Recovery analyzes this metadata, automatically reconstructs the damaged array, and provides access to its contents. After that, you can browse the recovered disk and save your files. The program can also restore files that were accidentally deleted from the network drive.
How to recover data from a Digiever
MN-2125 Pro+ has 2 HDD slots, and it supports the following array types:
- RAID 0;
- RAID 1;
- JBOD;
NAS supports:
- exFAT, VFAT, FAT 12 / 16 / 32;
- NTFS / ReFS;
- APFS / HFS+;
- Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
- VMFS / HikvisionFS;
How to Safely Recover Data from Disk Images
This utility allows you to create a complete copy of a disk and work with the disk image instead of the physical drive. This approach helps protect your data from:
- Overwriting during the recovery process;
- Additional data loss caused by bad sectors;
- User errors.
To create a disk image, follow these steps:
-
Ensure you have enough free space to store the image. Its size will typically match the size of the original disk.
-
In the main window, select the target disk and choose Tools - Save Disk. You can also select multiple disks if needed.
-
When the Image Creation Wizard opens, select whether you want to save the entire disk or only a specific region. Adjust the settings and click Next.
-
Choose the directory where the image will be saved. You may select any available disk connected to your PC or upload the image via FTP.
Where Are the User’s Files Actually Stored?
The Digiever MN-2125 Pro+ network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.
RAID Recovery Software: Detailed Comparison
| Product | Operating system | RAID controller support | Supported file systems | Virtual RAID controller support | Data recovery from damaged RAID | File preview |
|---|---|---|---|---|---|---|
| Hetman RAID Recovery | Windows, Linux, MacOS | Yes, over 100 controllers | FAT, exFAT, NTFS, ReFS, APFS, HFS+, Ext4, Ext3, Ext2, ReiserFS, Btrfs, VMFS, Hikvision, XFS, UFS, ZFS | Yes | Yes | Yes |
| DiskInternals RAID Recovery | Windows | Yes, over 10 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| R-Studio | Windows, Mac, Linux | Yes, over 20 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| UFS Explorer RAID Recovery | Windows, Mac, Linux | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| EaseUS Data Recovery | Windows | Yes, over 20 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| ReclaiMe Free RAID Recovery | Windows | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
If a NAS Digiever MN-2125 Pro+ device is showing signs of excessive noise or vibration, it may indicate a hardware issue. In such cases, it is recommended to contact a professional data recovery service to assess the situation and determine if data recovery is possible. They will have the necessary expertise and tools to handle the hardware issues and attempt data recovery if feasible. It is important not to continue using the device or attempt any DIY fixes as it may cause further damage and reduce the chances of successful data recovery.