Step-by-Step Guide to Fixing Faulty RAID Arrays in NAS Idis DR-6132P

Contents

• Why can’t ordinary software tools restore files from RAID?
• How to take hard disks out of the NAS and connect them to a PC?
  • Restoring data with Hetman RAID Recovery
  • Safe recovery from disk images
  • Where are user’s files stored?
  • Comparison of software for RAID recovery

Why can’t ordinary software tools restore files from RAID?

Conventional hard disks keep user’s data by writing it to their surface in a consecutive way, and this is how an entire file is stored on a single hard disk. However, when data is written to a RAID system, a file is divided into several parts. Then these parts are written consecutively to all hard disks within such array. The size of such parts may range from 2 KB to 2 MB, so each file is stored on several hard disks at the same time.

Such approach helps to speed up read and write operations, and it is evident that saving two parts of a file having the size of 1 GB to two hard disks simultaneously is much faster than saving the same 1 GB of data to one hard disk. However, this peculiarity makes file recovery more complicated.

Various RAID levels store information in different ways. Additionally, manufacturers like Idis also introduce some modifications to this process, and that is why data can be written to hard disk in a wide variety of ways.

How can data redundancy techniques such as mirroring or replication enhance data availability and protect against loss on NAS Idis DR-6132P devices?

Data redundancy techniques such as mirroring or replication can enhance data availability and protect against loss on NAS Idis DR-6132P devices in the following ways:

1. Mirroring: Mirroring involves creating an exact copy of data on multiple drives or devices. In the case of NAS Idis DR-6132P devices, mirroring can be set up to duplicate data on multiple hard drives within the same device or across multiple devices. This redundancy ensures that if one drive fails, the data can still be accessed from the mirrored drive, enhancing data availability and preventing loss.
2. Replication: Replication involves creating and maintaining multiple copies of data on different devices or locations. With NAS Idis DR-6132P devices, replication can be configured to replicate data to another NAS device or to a remote location. This redundancy ensures that if the primary device or location fails, the replicated data can be accessed, providing data availability and protection against loss.
3. High Availability: By implementing data redundancy techniques like mirroring or replication, NAS Idis DR-6132P devices can achieve high availability. High availability ensures that data is continuously accessible even in the event of hardware failures, network issues, or natural disasters. With redundant copies of data available, users can seamlessly switch to an alternate copy without any interruption, minimizing downtime and ensuring data availability.
4. Data Protection: Mirroring and replication also provide data protection against loss. In case of drive failures, data corruption, or accidental deletion, the redundant copies of data act as a backup, allowing for data recovery. By regularly synchronizing the primary and mirrored/replicated copies, any changes or modifications made to the data are also replicated, providing an up-to-date backup and protection against data loss.
5. Disaster Recovery: Mirroring and replication can play a crucial role in disaster recovery scenarios. By replicating data to a remote location or a secondary NAS device, businesses can ensure that their data is safe and accessible even in the event of a catastrophic event at the primary location. These redundant copies allow for quick recovery and restoration of data, minimizing the impact of a disaster.

Overall, the implementation of data redundancy techniques like mirroring or replication on NAS Idis DR-6132P devices enhances data availability, protects against data loss, and provides a robust backup and disaster recovery solution.

How to take hard disks out of the NAS and connect them to a PC?

Although NAS DR-6132P can be accessed over the network, you still need to take the hard disks out of the storage device and connect them to a Windows computer. Only in this case will the software be able to scan them properly. Here is what you should do:

1. Turn off the storage and disconnect it from the power supply.

   WARNING! Before you start taking hard disks out of your NAS device, read the manual carefully. Incorrect actions may damage your network-attached storage and/or the hard disks within the RAID system.

2. Take the hard disks out of the NAS one by one, carefully removing them from their slots. Remember that the disks are extremely vulnerable: hitting or dropping them may result in serious physical damage.

3. Make sure to mark each hard disk in accordance with how they were installed inside the NAS.

4. Remove the hard disks and connect them to the computer. In this video, we have explored what ports are used to connect hard disks, and what to do if there are not enough ports or connectors.

   Go to view

   

   How to Order Remote Data Recovery

Restoring data with Hetman RAID Recovery

This program recovers data from damaged RAID arrays and is fully compatible with Idis DR-6132P. The hard disks that make up the RAID contain technical information about the algorithm used to save files. When launched, Hetman RAID Recovery reads this information and puts the damaged array together. Then you can open the disk and save your files. Also, you can recover the files accidentally deleted from the network drive.

Go to view

How to recover data from a Idis

DR-6132P has 6 HDD slots, and it supports the following array types:

• RAID 0;
• RAID 1;
• RAID 5;
• RAID 6;
• JBOD;

NAS supports:

• exFAT, VFAT, FAT 12 / 16 / 32;
• NTFS / ReFS;
• APFS / HFS+;
• Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
• VMFS / HikvisionFS;

Safe recovery from disk images

This utility lets you save an entire copy of the disk to file and then work with this image instead of the actual disk. Such feature helps to protect data on the disk from:

• Overwriting during the recovery process;
• Loss resulting from bad sectors;
• User mistakes.

To create an image, do the following:

1. Make sure that you have enough free space to save the image. The image file size usually equals the disk size.

2. Select the disk in the main window, and choose from the menu Tools – Save Disk. You can select multiple disks to be saved.

3. When the image creation wizard starts, you can choose to save the entire disk or select only a part of it. Specify the parameters and click Next.

   

4. At this stage, you need to choose a directory where to save the image. Choose any disk connected to this PC, or save the image by FTP.

   

Where are user’s files stored?

The Idis DR-6132P network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

Comparison of software for RAID recovery