NAS Idis DR-8532D Data Recovery: Handling Faulty RAID Arrays

Contents

• Why can’t ordinary software tools restore files from RAID?
• How to take hard disks out of the NAS and connect them to a PC?
  • Restoring data with Hetman RAID Recovery
  • Safe recovery from disk images
  • Where are user’s files stored?
  • Comparison of software for RAID recovery

Why can’t ordinary software tools restore files from RAID?

Conventional hard disks keep user’s data by writing it to their surface in a consecutive way, and this is how an entire file is stored on a single hard disk. However, when data is written to a RAID system, a file is divided into several parts. Then these parts are written consecutively to all hard disks within such array. The size of such parts may range from 2 KB to 2 MB, so each file is stored on several hard disks at the same time.

Such approach helps to speed up read and write operations, and it is evident that saving two parts of a file having the size of 1 GB to two hard disks simultaneously is much faster than saving the same 1 GB of data to one hard disk. However, this peculiarity makes file recovery more complicated.

Various RAID levels store information in different ways. Additionally, manufacturers like Idis also introduce some modifications to this process, and that is why data can be written to hard disk in a wide variety of ways.

Can device firmware rollback or downgrading impact data loss risks for NAS Idis DR-8532D devices?

Rolling back or downgrading the firmware on a NAS device such as the Idis DR-8532D can potentially introduce data loss risks. When you rollback or downgrade the firmware, you are essentially reverting the device to a previous version of its software. This process can sometimes lead to compatibility issues, software bugs, or even corruption of data.

Here are a few reasons why data loss risks may be associated with firmware rollback or downgrading:

1. Incompatibility: The older firmware version may not be fully compatible with the current data structure or file system used by the device. This can result in data corruption or loss when accessing or transferring files.
2. Bug Fixes: Firmware updates often include bug fixes and security patches. By downgrading the firmware, you may reintroduce known bugs or vulnerabilities that could impact the integrity of your data.
3. Configuration Changes: Firmware updates may introduce changes to the device's configuration or settings. Rolling back the firmware can potentially revert these changes, leading to misconfigurations that may affect data access or storage.
4. Lack of Support: Older firmware versions may not receive ongoing support or updates from the manufacturer. This means that any issues or vulnerabilities discovered in the older version may remain unaddressed, potentially putting your data at risk.

To minimize the data loss risks, it is crucial to backup your data before attempting any firmware rollback or downgrade. This ensures that you have a copy of your important files in case any issues arise during the process. Additionally, it is advisable to consult the manufacturer's documentation or seek support from their technical team to understand the potential risks and implications of a firmware rollback for your specific NAS device.

How to take hard disks out of the NAS and connect them to a PC?

Although NAS DR-8532D can be accessed over the network, you still need to take the hard disks out of the storage device and connect them to a Windows computer. Only in this case will the software be able to scan them properly. Here is what you should do:

1. Turn off the storage and disconnect it from the power supply.

   WARNING! Before you start taking hard disks out of your NAS device, read the manual carefully. Incorrect actions may damage your network-attached storage and/or the hard disks within the RAID system.

2. Take the hard disks out of the NAS one by one, carefully removing them from their slots. Remember that the disks are extremely vulnerable: hitting or dropping them may result in serious physical damage.

3. Make sure to mark each hard disk in accordance with how they were installed inside the NAS.

4. Remove the hard disks and connect them to the computer. In this video, we have explored what ports are used to connect hard disks, and what to do if there are not enough ports or connectors.

   Go to view

   

   How to Order Remote Data Recovery

Restoring data with Hetman RAID Recovery

This program recovers data from damaged RAID arrays and is fully compatible with Idis DR-8532D. The hard disks that make up the RAID contain technical information about the algorithm used to save files. When launched, Hetman RAID Recovery reads this information and puts the damaged array together. Then you can open the disk and save your files. Also, you can recover the files accidentally deleted from the network drive.

Go to view

How to recover data from a Idis

DR-8532D has 8 HDD slots, and it supports the following array types:

• RAID 0;
• RAID 1;
• RAID 5;
• RAID 6;
• RAID 50;
• RAID 60;
• JBOD;

NAS supports:

• exFAT, VFAT, FAT 12 / 16 / 32;
• NTFS / ReFS;
• APFS / HFS+;
• Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
• VMFS / HikvisionFS;

Safe recovery from disk images

This utility lets you save an entire copy of the disk to file and then work with this image instead of the actual disk. Such feature helps to protect data on the disk from:

• Overwriting during the recovery process;
• Loss resulting from bad sectors;
• User mistakes.

To create an image, do the following:

1. Make sure that you have enough free space to save the image. The image file size usually equals the disk size.

2. Select the disk in the main window, and choose from the menu Tools – Save Disk. You can select multiple disks to be saved.

3. When the image creation wizard starts, you can choose to save the entire disk or select only a part of it. Specify the parameters and click Next.

   

4. At this stage, you need to choose a directory where to save the image. Choose any disk connected to this PC, or save the image by FTP.

   

Where are user’s files stored?

The Idis DR-8532D network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

Comparison of software for RAID recovery