- Why Regular Data Recovery Tools Can’t Restore Files from RAID
- Key Information About the NAS Netgear ReadyNAS RR2304
- How to Remove Hard Disks from Your NAS and Connect Them to a PC
Why Regular Data Recovery Tools Can’t Restore Files from RAID
Conventional hard drives store user data by writing it sequentially across the disk surface, which means an entire file is typically located on a single drive. In contrast, when data is written to a RAID array, each file is split into multiple fragments. These fragments are then distributed and written in sequence across all the drives in the array. Depending on the configuration, fragment sizes can range from 2 KB to 2 MB, so every file is physically stored across several disks at once.
This approach significantly increases read and write performance — after all, writing two halves of a 1 GB file to two drives simultaneously is much faster than writing the full 1 GB to a single disk. However, this same mechanism makes file recovery far more complex.
Different RAID levels use different methods to distribute and protect data. On top of that, manufacturers like Netgear often add their own proprietary structures and variations. As a result, data can be written to disks in many different formats, and each requires a specific approach during recovery.
Are there any data storage capacity limitations that can impact data loss risks for NAS Netgear ReadyNAS RR2304 devices?
Yes, there are data storage capacity limitations that can impact data loss risks for NAS Netgear ReadyNAS RR2304 devices. The ReadyNAS RR2304 has a maximum supported capacity of 40TB (with 4x 10TB drives). If the storage capacity exceeds this limit, there is a risk of data loss as the device may not be able to handle the additional data properly. Additionally, it is important to note that as the storage capacity increases, the risk of drive failures and data loss also increases. It is recommended to regularly backup the data stored on the NAS device to mitigate the risk of data loss.
How to Remove Hard Disks from Your NAS and Connect Them to a PC
Although the NAS ReadyNAS RR2304 can be accessed over the network, you still need to remove its hard disks and connect them directly to a Windows PC. Only then can the recovery software properly scan and analyze the drives. Follow these steps:
-
Power off the NAS and disconnect it from the power source.
WARNING! Before removing any drives, carefully read the device manual. Improper actions may damage both the NAS enclosure and the hard disks in the RAID array.
-
Remove the hard disks one by one, gently sliding each drive out of its slot. Remember that hard disks are highly sensitive: any impact or drop can cause serious physical damage.
-
Label each hard disk according to its position inside the NAS. The order of the drives is crucial for correct RAID reconstruction.
-
Connect the drives to your computer. In this video, we explain which ports you can use to connect hard disks and what to do if your PC does not have enough free connectors.
Go to view
Step-by-Step Data Recovery with Hetman RAID Recovery
This program restores data from damaged RAID arrays and is fully compatible with Netgear ReadyNAS RR2304. Each hard disk in the array contains technical metadata describing how files were written. When launched, Hetman RAID Recovery analyzes this metadata, automatically reconstructs the damaged array, and provides access to its contents. After that, you can browse the recovered disk and save your files. The program can also restore files that were accidentally deleted from the network drive.
How to recover data from a Netgear
ReadyNAS RR2304 has 4 HDD slots, and it supports the following array types:
- RAID 0;
- X-RAID;
- RAID 1;
- RAID 5;
- RAID 6;
- JBOD;
NAS supports:
- Ext2;
- Ext3;
- Ext4;
- Btrfs;
How to Safely Recover Data from Disk Images
This utility allows you to create a complete copy of a disk and work with the disk image instead of the physical drive. This approach helps protect your data from:
- Overwriting during the recovery process;
- Additional data loss caused by bad sectors;
- User errors.
To create a disk image, follow these steps:
-
Ensure you have enough free space to store the image. Its size will typically match the size of the original disk.
-
In the main window, select the target disk and choose Tools - Save Disk. You can also select multiple disks if needed.
-
When the Image Creation Wizard opens, select whether you want to save the entire disk or only a specific region. Adjust the settings and click Next.
-
Choose the directory where the image will be saved. You may select any available disk connected to your PC or upload the image via FTP.
Where Are the User’s Files Actually Stored?
The Netgear ReadyNAS RR2304 network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.
RAID Recovery Software: Detailed Comparison
| Product | Operating system | RAID controller support | Supported file systems | Virtual RAID controller support | Data recovery from damaged RAID | File preview |
|---|---|---|---|---|---|---|
| Hetman RAID Recovery | Windows, Linux, MacOS | Yes, over 100 controllers | FAT, exFAT, NTFS, ReFS, APFS, HFS+, Ext4, Ext3, Ext2, ReiserFS, Btrfs, VMFS, Hikvision, XFS, UFS, ZFS | Yes | Yes | Yes |
| DiskInternals RAID Recovery | Windows | Yes, over 10 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| R-Studio | Windows, Mac, Linux | Yes, over 20 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| UFS Explorer RAID Recovery | Windows, Mac, Linux | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| EaseUS Data Recovery | Windows | Yes, over 20 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| ReclaiMe Free RAID Recovery | Windows | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
Data recovery from a NAS (Network Attached Storage) device like the Netgear ReadyNAS RR2304 can be done by individuals, but it can be a complex and challenging process.
If you have experience and knowledge in data recovery and are comfortable working with hardware and software, you may attempt to recover the data on your own. However, it's important to note that improper handling or recovery attempts can potentially worsen the situation and make data recovery more difficult or even impossible.
In many cases, it is recommended to seek professional assistance from data recovery specialists or companies. These professionals have the necessary expertise, tools, and resources to handle complex data recovery situations, including recovering data from NAS devices. They can ensure that the recovery process is done correctly and minimize the risk of further data loss.
If the data on your NAS device is critical or valuable, it is generally advisable to consult with a professional data recovery service to maximize the chances of successful recovery.