- Why can’t ordinary software tools restore files from RAID?
- How to take hard disks out of the NAS and connect them to a PC?
Why can’t ordinary software tools restore files from RAID?
Conventional hard disks keep user’s data by writing it to their surface in a consecutive way, and this is how an entire file is stored on a single hard disk. However, when data is written to a RAID system, a file is divided into several parts. Then these parts are written consecutively to all hard disks within such array. The size of such parts may range from 2 KB to 2 MB, so each file is stored on several hard disks at the same time.
Such approach helps to speed up read and write operations, and it is evident that saving two parts of a file having the size of 1 GB to two hard disks simultaneously is much faster than saving the same 1 GB of data to one hard disk. However, this peculiarity makes file recovery more complicated.
Various RAID levels store information in different ways. Additionally, manufacturers like QNAP also introduce some modifications to this process, and that is why data can be written to hard disk in a wide variety of ways.
How can regular data verification or checksum processes help maintain data integrity on NAS QNAP Turbo Station TS-EC1680U R2 devices?
Regular data verification or checksum processes can help maintain data integrity on NAS QNAP Turbo Station TS-EC1680U R2 devices in the following ways:
- Detecting data corruption: Regular data verification or checksum processes can help identify any corruption or alteration in the stored data. By comparing the calculated checksum with the original checksum, any changes or errors in the data can be detected.
- Preventing silent data corruption: Silent data corruption refers to the situation where data gets corrupted without any notification or error indication. Regular data verification processes can help identify such corruption and take appropriate actions to rectify it.
- Ensuring data consistency: Data verification processes can ensure that the data stored on the NAS device remains consistent over time. By periodically verifying the data against its checksum, any inconsistencies or discrepancies can be identified and resolved.
- Enhancing data reliability: By regularly verifying the data integrity, the reliability of the stored data is improved. This is particularly important for critical data or sensitive information that needs to be protected and maintained accurately.
- Minimizing data loss: Regular data verification processes can help minimize the risk of data loss by identifying any potential issues or errors early on. By detecting and rectifying data corruption promptly, the chances of complete data loss can be reduced.
- Facilitating data recovery: In case of data loss or corruption, having regular data verification processes in place can facilitate the recovery process. By comparing the corrupted data with the original checksum, it becomes easier to identify and restore the correct data.
Overall, regular data verification or checksum processes play a crucial role in maintaining data integrity on NAS QNAP Turbo Station TS-EC1680U R2 devices. They help ensure the accuracy, consistency, and reliability of the stored data, minimizing the risk of data loss or corruption.
How to take hard disks out of the NAS and connect them to a PC?
Although NAS Turbo Station TS-EC1680U R2 can be accessed over the network, you still need to take the hard disks out of the storage device and connect them to a Windows computer. Only in this case will the software be able to scan them properly. Here is what you should do:
-
Turn off the storage and disconnect it from the power supply.
WARNING! Before you start taking hard disks out of your NAS device, read the manual carefully. Incorrect actions may damage your network-attached storage and/or the hard disks within the RAID system.
-
Take the hard disks out of the NAS one by one, carefully removing them from their slots. Remember that the disks are extremely vulnerable: hitting or dropping them may result in serious physical damage.
-
Make sure to mark each hard disk in accordance with how they were installed inside the NAS.
-
Remove the hard disks and connect them to the computer. In this video, we have explored what ports are used to connect hard disks, and what to do if there are not enough ports or connectors.
Go to view
Restoring data with Hetman RAID Recovery
This program recovers data from damaged RAID arrays and is fully compatible with QNAP Turbo Station TS-EC1680U R2. The hard disks that make up the RAID contain technical information about the algorithm used to save files. When launched, Hetman RAID Recovery reads this information and puts the damaged array together. Then you can open the disk and save your files. Also, you can recover the files accidentally deleted from the network drive.
How to recover data from a QNAP
Turbo Station TS-EC1680U R2 has 16 HDD slots, and it supports the following array types:
- RAID 50;
- RAID 60;
- RAID 5;
- RAID 6;
- RAID 10;
- RAID 0;
- RAID 1;
- JBOD;
NAS supports:
- ZFS;
- EXT4;
- EXT3;
- exFAT;
- FAT32 (External Disk Only);
- NTFS (External Disk Only);
- HFS+ (External Disk Read Only);
Safe recovery from disk images
This utility lets you save an entire copy of the disk to file and then work with this image instead of the actual disk. Such feature helps to protect data on the disk from:
- Overwriting during the recovery process;
- Loss resulting from bad sectors;
- User mistakes.
To create an image, do the following:
-
Make sure that you have enough free space to save the image. The image file size usually equals the disk size.
-
Select the disk in the main window, and choose from the menu Tools – Save Disk. You can select multiple disks to be saved.
-
When the image creation wizard starts, you can choose to save the entire disk or select only a part of it. Specify the parameters and click Next.
-
At this stage, you need to choose a directory where to save the image. Choose any disk connected to this PC, or save the image by FTP.
Where are user’s files stored?
The QNAP Turbo Station TS-EC1680U R2 network-attached storage keeps QTS (QuTS hero) operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.
Comparison of software for RAID recovery
| Product | Operating system | License type | RAID controller support | Supported file systems | Virtual RAID controller support | Data recovery from damaged RAID | File preview |
|---|---|---|---|---|---|---|---|
| Hetman RAID Recovery | Windows | Paid | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| DiskInternals RAID Recovery | Windows | Paid | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| R-Studio | Windows, Mac, Linux | Paid | Yes, over 200 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| UFS Explorer RAID Recovery | Windows, Mac, Linux | Paid | Yes, over 1,000 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
| EaseUS Data Recovery | Windows | Paid | Yes, over 20 controllers | FAT, NTFS, Ext2/3/4, HFS+ | No | Yes | Yes |
| ReclaiMe Free RAID Recovery | Windows | Free | Yes, over 100 controllers | FAT, NTFS, Ext2/3/4, HFS+ | Yes | Yes | Yes |
