Professional Tips for RAID Array Data Recovery on NAS Raidon Mobile Rack iR8774 Devices

Contents

• Why Regular Data Recovery Tools Can’t Restore Files from RAID
• Key Information About the NAS Raidon Mobile Rack iR8774
• How to Remove Hard Disks from Your NAS and Connect Them to a PC
  • Step-by-Step Data Recovery with Hetman RAID Recovery
  • How to Safely Recover Data from Disk Images
  • Where Are the User’s Files Actually Stored?
  • RAID Recovery Software: Detailed Comparison

Why Regular Data Recovery Tools Can’t Restore Files from RAID

Conventional hard drives store user data by writing it sequentially across the disk surface, which means an entire file is typically located on a single drive. In contrast, when data is written to a RAID array, each file is split into multiple fragments. These fragments are then distributed and written in sequence across all the drives in the array. Depending on the configuration, fragment sizes can range from 2 KB to 2 MB, so every file is physically stored across several disks at once.

This approach significantly increases read and write performance — after all, writing two halves of a 1 GB file to two drives simultaneously is much faster than writing the full 1 GB to a single disk. However, this same mechanism makes file recovery far more complex.

Different RAID levels use different methods to distribute and protect data. On top of that, manufacturers like Raidon often add their own proprietary structures and variations. As a result, data can be written to disks in many different formats, and each requires a specific approach during recovery.

Are there any specific system logs or event notifications to monitor for early detection of data loss on NAS Raidon Mobile Rack iR8774 devices?

There are several system logs and event notifications that you can monitor for early detection of data loss on NAS Raidon Mobile Rack iR8774 devices. Here are a few key ones:

1. RAID Controller Logs: The RAID controller in the NAS device maintains logs that can provide information about any disk failures, rebuilds, or other issues related to the RAID array. Monitoring these logs can help you identify any potential data loss events.
2. Disk SMART Data: Most modern hard drives support Self-Monitoring, Analysis, and Reporting Technology (SMART). SMART data provides information about the health and status of the disks, including any signs of failure or degradation. Monitoring the SMART data can help you detect potential data loss events before they occur.
3. NAS System Logs: The NAS device itself maintains system logs that can provide valuable information about any errors, warnings, or failures related to the file system, network connectivity, or other critical components. Monitoring these logs can help you identify any issues that might lead to data loss.
4. Email Notifications: Many NAS devices allow you to configure email notifications for specific events, such as disk failures, RAID rebuilds, or file system errors. By enabling these notifications, you can receive real-time alerts about potential data loss events.
5. Performance Monitoring: Monitoring the performance of the NAS device, such as disk I/O rates, CPU usage, or network throughput, can help you identify any abnormal behavior that might indicate a data loss event.

It is important to consult the documentation or user manual of your specific NAS Raidon Mobile Rack iR8774 device to understand the available logs and event notification options.

How to Remove Hard Disks from Your NAS and Connect Them to a PC

Although the NAS Mobile Rack iR8774 can be accessed over the network, you still need to remove its hard disks and connect them directly to a Windows PC. Only then can the recovery software properly scan and analyze the drives. Follow these steps:

1. Power off the NAS and disconnect it from the power source.

   WARNING! Before removing any drives, carefully read the device manual. Improper actions may damage both the NAS enclosure and the hard disks in the RAID array.

2. Remove the hard disks one by one, gently sliding each drive out of its slot. Remember that hard disks are highly sensitive: any impact or drop can cause serious physical damage.

3. Label each hard disk according to its position inside the NAS. The order of the drives is crucial for correct RAID reconstruction.

4. Connect the drives to your computer. In this video, we explain which ports you can use to connect hard disks and what to do if your PC does not have enough free connectors.

   Go to view

   

   How to Order Remote Data Recovery

Step-by-Step Data Recovery with Hetman RAID Recovery

This program restores data from damaged RAID arrays and is fully compatible with Raidon Mobile Rack iR8774. Each hard disk in the array contains technical metadata describing how files were written. When launched, Hetman RAID Recovery analyzes this metadata, automatically reconstructs the damaged array, and provides access to its contents. After that, you can browse the recovered disk and save your files. The program can also restore files that were accidentally deleted from the network drive.

Go to view

How to recover data from a Raidon

Mobile Rack iR8774 has 2 HDD slots, and it supports the following array types:

• RAID 0;
• RAID 1;
• JBOD;

NAS supports:

• APFS / HFS+;
• Ext2 / Ext3 / Ext4;

How to Safely Recover Data from Disk Images

This utility allows you to create a complete copy of a disk and work with the disk image instead of the physical drive. This approach helps protect your data from:

• Overwriting during the recovery process;
• Additional data loss caused by bad sectors;
• User errors.

To create a disk image, follow these steps:

1. Ensure you have enough free space to store the image. Its size will typically match the size of the original disk.

2. In the main window, select the target disk and choose Tools - Save Disk. You can also select multiple disks if needed.

3. When the Image Creation Wizard opens, select whether you want to save the entire disk or only a specific region. Adjust the settings and click Next.

   

4. Choose the directory where the image will be saved. You may select any available disk connected to your PC or upload the image via FTP.

   

Where Are the User’s Files Actually Stored?

The Raidon Mobile Rack iR8774 network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

RAID Recovery Software: Detailed Comparison