NAS Synology Diskstation DS107+ / DS107 / DS107e RAID Arrays: Data Recovery Advice After Component Wear

⭐ NAS RAID arrays affected by natural component wear? Here’s what you need to know.

NAS Synology Diskstation DS107+ / DS107 / DS107e RAID Arrays: Data Recovery Advice After Component Wear

Synology Diskstation DS107+ / DS107 / DS107e NAS Data Recovery in 2024

In this step-by-step tutorial, we’ll show you how to rebuild your RAID and recover data from Diskstation DS107+ / DS107 / DS107e.

NAS Synology Diskstation DS107+ / DS107 / DS107e RAID Arrays: Data Recovery Advice After Component Wear

RAID Recovery™ 2.6
Recover data from damaged RAID arrays inaccessible from a computer.
Download

Why can’t ordinary software tools restore files from RAID?

Conventional hard disks keep user’s data by writing it to their surface in a consecutive way, and this is how an entire file is stored on a single hard disk. However, when data is written to a RAID system, a file is divided into several parts. Then these parts are written consecutively to all hard disks within such array. The size of such parts may range from 2 KB to 2 MB, so each file is stored on several hard disks at the same time.

Such approach helps to speed up read and write operations, and it is evident that saving two parts of a file having the size of 1 GB to two hard disks simultaneously is much faster than saving the same 1 GB of data to one hard disk. However, this peculiarity makes file recovery more complicated.

Various RAID levels store information in different ways. Additionally, manufacturers like Synology also introduce some modifications to this process, and that is why data can be written to hard disk in a wide variety of ways.

Is there a risk of data loss if a NAS Synology Diskstation DS107+ / DS107 / DS107e device is physically damaged or stolen?

Yes, there is a risk of data loss if a NAS Synology Diskstation DS107+ / DS107 / DS107e device is physically damaged or stolen. If the device is physically damaged, the hard drives inside may become inaccessible, leading to potential data loss. Similarly, if the device is stolen, the data stored on the hard drives can be compromised or lost entirely. It is important to have proper backup measures in place to mitigate the risk of data loss in such scenarios.

How to take hard disks out of the NAS and connect them to a PC?

Although NAS Diskstation DS107+ / DS107 / DS107e can be accessed over the network, you still need to take the hard disks out of the storage device and connect them to a Windows computer. Only in this case will the software be able to scan them properly. Here is what you should do:

  1. Turn off the storage and disconnect it from the power supply.

    WARNING! Before you start taking hard disks out of your NAS device, read the manual carefully. Incorrect actions may damage your network-attached storage and/or the hard disks within the RAID system.

  2. Take the hard disks out of the NAS one by one, carefully removing them from their slots. Remember that the disks are extremely vulnerable: hitting or dropping them may result in serious physical damage.

  3. Make sure to mark each hard disk in accordance with how they were installed inside the NAS.

  4. Remove the hard disks and connect them to the computer. In this video, we have explored what ports are used to connect hard disks, and what to do if there are not enough ports or connectors.

    Go to view
    How to Order Remote Data Recovery

    How to Order Remote Data Recovery

Restoring data with Hetman RAID Recovery

Hetman Raid Recovery

This program recovers data from damaged RAID arrays and is fully compatible with Synology Diskstation DS107+ / DS107 / DS107e. The hard disks that make up the RAID contain technical information about the algorithm used to save files. When launched, Hetman RAID Recovery reads this information and puts the damaged array together. Then you can open the disk and save your files. Also, you can recover the files accidentally deleted from the network drive.

Go to view
How to recover data from a Synology

How to recover data from a Synology

Diskstation DS107+ / DS107 / DS107e has 1 HDD slots, and it supports the following array types:

  • Nie wspiera;

NAS supports:

  • EXT3;
  • FAT (External Disk Only);
  • NTFS (External Disk Read Only);

Safe recovery from disk images

This utility lets you save an entire copy of the disk to file and then work with this image instead of the actual disk. Such feature helps to protect data on the disk from:

  • Overwriting during the recovery process;
  • Loss resulting from bad sectors;
  • User mistakes.

To create an image, do the following:

  1. Make sure that you have enough free space to save the image. The image file size usually equals the disk size.

  2. Select the disk in the main window, and choose from the menu ToolsSave Disk. You can select multiple disks to be saved.

  3. When the image creation wizard starts, you can choose to save the entire disk or select only a part of it. Specify the parameters and click Next.

    Hetman Raid Recovery: Image Creation Wizard
  4. At this stage, you need to choose a directory where to save the image. Choose any disk connected to this PC, or save the image by FTP.

    Hetman Raid Recovery: hoose any disk connected to this PC, or save the image by FTP

Where are user’s files stored?

The Synology Diskstation DS107+ / DS107 / DS107e network-attached storage keeps DSM (DiskStation Manager) operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

Comparison of software for RAID recovery

Product Operating system License type RAID controller support Supported file systems Virtual RAID controller support Data recovery from damaged RAID File preview
Hetman RAID Recovery Windows Paid Yes, over 100 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes
DiskInternals RAID Recovery Windows Paid Yes, over 100 controllers FAT, NTFS, Ext2/3/4, HFS+ No Yes Yes
R-Studio Windows, Mac, Linux Paid Yes, over 200 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes
UFS Explorer RAID Recovery Windows, Mac, Linux Paid Yes, over 1,000 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes
EaseUS Data Recovery Windows Paid Yes, over 20 controllers FAT, NTFS, Ext2/3/4, HFS+ No Yes Yes
ReclaiMe Free RAID Recovery Windows Free Yes, over 100 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes

Feedback

We will be happy to answer your questions!

Comments (1)

  • Hetman Software: Data Recovery
    Hetman Software: Data Recovery 9.08.2022 12:31 #
    If you want to ask a question about data recovery, from NAS Diskstation DS107+ / DS107 / DS107e, feel free to leave a comment!
Post comment
User
Leave a reply
Your email address will not be published. Required fields are marked *

Vladimir Artiukh

Author: Vladimir Artiukh, Technical Writer

Vladimir Artiukh is a technical writer for Hetman Software, as well as the voice and face of their English-speaking YouTube channel, Hetman Software: Data Recovery for Windows. He handles tutorials, how-tos, and detailed reviews on how the company’s tools work with all kinds of data storage devices.

Oleg Afonin

Editor: Oleg Afonin, Technical Writer

Oleg Afonin is an expert in mobile forensics, data recovery and computer systems. He often attends large data security conferences, and writes several blogs for such resources as xaker.ru, Elcomsoft and Habr. In addition to his online activities, Oleg’s articles are also published in professional magazines. Also, Oleg Afonin is the co-author of a well-known book, Mobile Forensics - Advanced Investigative Strategies.

Share

Questions and answers

  • What are the key features and capabilities of the Synology Diskstation DS107+ / DS107 / DS107e that make it suitable for copying data from different devices?

    The Synology Diskstation DS107+ / DS107 / DS107e is a network-attached storage (NAS) device that offers several key features and capabilities that make it suitable for copying data from different devices:

    1. High-performance CPU: The DS107+ is equipped with a powerful CPU, allowing for fast data transfer speeds and efficient processing of tasks.
    2. Multiple drive bays: The DS107+ and DS107e come with a single drive bay, while the DS107 has two drive bays. These drive bays allow you to install multiple hard drives, providing ample storage space for copying and storing data from different devices.
    3. RAID support: The DS107+ and DS107 support RAID 0 and RAID 1 configurations, while the DS107e supports JBOD. RAID allows for data redundancy and increased performance, ensuring that your data is protected and accessible even in case of drive failure.
    4. Gigabit Ethernet: All three models feature a Gigabit Ethernet port, enabling high-speed data transfer over the network. This allows for quick copying of data from different devices connected to the same network.
    5. USB ports: The DS107+ and DS107e have two USB 2.0 ports, while the DS107 has one USB 2.0 port. These ports can be used to connect external storage devices, such as USB drives or external hard drives, for easy data copying.
    6. File sharing and synchronization: The DS107+ / DS107 / DS107e supports various file sharing protocols, including SMB, AFP, FTP, and WebDAV. This allows you to easily copy data from different devices, regardless of their operating system. Additionally, Synology's DSM operating system offers synchronization tools like Synology Drive and Cloud Station, enabling seamless file syncing across devices.
    7. Backup solutions: Synology Diskstations come with various backup solutions, such as Synology Hybrid RAID (SHR), Hyper Backup, and Time Machine support. These features allow you to create scheduled backups of your data from different devices, ensuring its safety and availability.
    8. Mobile apps and remote access: Synology provides mobile apps for iOS and Android devices, allowing you to access and copy data from your Diskstation remotely. This feature is particularly useful when copying data from mobile devices like smartphones or tablets.

    Overall, the Synology Diskstation DS107+ / DS107 / DS107e offers a range of features and capabilities that make it suitable for copying data from different devices. Its high-performance hardware, network connectivity options, RAID support, and backup solutions make it a reliable and versatile NAS solution for data copying and storage.

  • How can the NAS Synology Diskstation DS107+ / DS107 / DS107e be set up to efficiently copy data from various devices, such as computers, smartphones, or external hard drives?

    To efficiently copy data from various devices to a Synology Diskstation DS107+ / DS107 / DS107e, you can follow these steps:

    1. Connect the Diskstation to your network: Plug the Diskstation into your router using an Ethernet cable. Power it on and wait for it to boot up.
    2. Set up the Diskstation: Open a web browser on a computer connected to the same network and enter the Diskstation's IP address in the address bar. Follow the on-screen instructions to set up the Diskstation, including creating a username and password.
    3. Install the necessary applications: Once the Diskstation is set up, go to the Package Center and install the required applications for data copying. The applications you may need include File Station, Cloud Sync, Drive, or Hyper Backup. These applications allow you to copy data from various devices.
    4. Configure File Station: Open File Station on the Diskstation and create folders to organize the data you will be copying. You can create separate folders for each device or category of data.
    5. Copy data from computers: Install the Synology Drive or Cloud Sync application on your computer. These applications allow you to synchronize files between your computer and the Diskstation. Configure the applications to sync the desired folders with the appropriate folders on the Diskstation.
    6. Copy data from smartphones: Install the Synology Drive or DS file app on your smartphone. These apps allow you to access and copy files to the Diskstation. You can manually copy files or set up automatic syncing for specific folders.
    7. Copy data from external hard drives: Connect the external hard drive to one of the USB ports on the Diskstation. Open File Station and navigate to the external drive. Copy the desired files or folders to the appropriate location on the Diskstation.
    8. Enable scheduled backups: To ensure regular backups, configure the Hyper Backup application to run scheduled backups of the data on the Diskstation. This will help protect your data in case of accidental deletion or hardware failure.

    By following these steps, you can efficiently copy data from various devices to your Synology Diskstation DS107+ / DS107 / DS107e.

  • What are some best practices or recommended methods for ensuring data integrity and security when using the Synology Diskstation DS107+ / DS107 / DS107e to copy data from different devices?

    Here are some best practices and recommended methods for ensuring data integrity and security when using the Synology Diskstation DS107+ / DS107 / DS107e to copy data from different devices:

    1. Enable data encryption: Use the built-in encryption feature provided by Synology to encrypt your data while it is being transferred and stored on the Diskstation. This ensures that even if someone gains unauthorized access to your data, they won't be able to read it without the encryption key.
    2. Use secure protocols: Always use secure protocols such as SFTP (Secure File Transfer Protocol) or HTTPS when transferring data to and from the Diskstation. These protocols encrypt the data during transit, preventing eavesdropping or interception of sensitive information.
    3. Enable two-factor authentication (2FA): Enable two-factor authentication on your Diskstation to add an extra layer of security. This requires users to provide a second authentication factor, such as a verification code from a mobile app, in addition to their password when accessing the Diskstation.
    4. Regularly update the Diskstation firmware: Synology frequently releases firmware updates that include security patches and bug fixes. Regularly check for updates and apply them to ensure that your Diskstation is protected against known vulnerabilities.
    5. Implement strong passwords: Ensure that all user accounts on the Diskstation have strong, unique passwords. Avoid using easily guessable passwords and consider using a password manager to generate and securely store complex passwords.
    6. Enable firewall and network security: Configure the built-in firewall on the Diskstation to restrict access to only necessary ports and services. Additionally, consider enabling network security features such as IP blocking, which can prevent unauthorized access attempts.
    7. Regularly backup your data: Implement a backup strategy that includes regular backups of your data stored on the Diskstation. This can help mitigate the impact of data loss or corruption due to hardware failures, accidental deletions, or security breaches.
    8. Monitor and log activities: Enable logging and monitoring features on the Diskstation to track and review activities related to data transfers and user access. This can help identify any suspicious or unauthorized activities and allow for timely response and investigation.
    9. Educate users on security best practices: Train and educate users on the importance of data security and best practices for handling sensitive information. This includes avoiding clicking on suspicious links or downloading files from untrusted sources.
    10. Regularly review and audit permissions: Periodically review and audit user permissions and access rights to ensure that only authorized individuals have access to the data stored on the Diskstation. Remove any unnecessary or outdated accounts to minimize the risk of unauthorized access.

    By following these best practices, you can enhance data integrity and security when using the Synology Diskstation DS107+ / DS107 / DS107e to copy data from different devices.

Hello! This is AI-based Hetman Software virtual assistant, and it will answer any of your questions right away.
Start Chat