NAS Digiever MN-1136 Pro+ Data Recovery: Fixing Faulty RAID Arrays

Contents

• Why Regular Data Recovery Tools Can’t Restore Files from RAID
• Key Information About the NAS Digiever MN-1136 Pro+
• How to Remove Hard Disks from Your NAS and Connect Them to a PC
  • Step-by-Step Data Recovery with Hetman RAID Recovery
  • How to Safely Recover Data from Disk Images
  • Where Are the User’s Files Actually Stored?
  • RAID Recovery Software: Detailed Comparison

Why Regular Data Recovery Tools Can’t Restore Files from RAID

Conventional hard drives store user data by writing it sequentially across the disk surface, which means an entire file is typically located on a single drive. In contrast, when data is written to a RAID array, each file is split into multiple fragments. These fragments are then distributed and written in sequence across all the drives in the array. Depending on the configuration, fragment sizes can range from 2 KB to 2 MB, so every file is physically stored across several disks at once.

This approach significantly increases read and write performance — after all, writing two halves of a 1 GB file to two drives simultaneously is much faster than writing the full 1 GB to a single disk. However, this same mechanism makes file recovery far more complex.

Different RAID levels use different methods to distribute and protect data. On top of that, manufacturers like Digiever often add their own proprietary structures and variations. As a result, data can be written to disks in many different formats, and each requires a specific approach during recovery.

How can regular vulnerability assessments and security audits help identify and mitigate potential data loss risks for NAS Digiever MN-1136 Pro+ devices?

Regular vulnerability assessments and security audits can help identify and mitigate potential data loss risks for NAS Digiever MN-1136 Pro+ devices in the following ways:

1. Identify vulnerabilities: Vulnerability assessments can identify any weaknesses or vulnerabilities in the device's firmware, operating system, or applications. This helps in understanding potential entry points for attackers and mitigating those risks.
2. Patch management: Security audits can ensure that the device's firmware and software are up to date with the latest security patches and updates. Regular patch management helps in addressing known vulnerabilities and reducing the risk of data loss.
3. Access controls: Audits can assess the effectiveness of access controls implemented on the NAS device. This includes reviewing user permissions, password policies, and authentication mechanisms. By ensuring that only authorized personnel have access to sensitive data, the risk of unauthorized access and subsequent data loss can be minimized.
4. Encryption: Vulnerability assessments can evaluate the encryption mechanisms employed by the device. It is important to ensure that data stored on the NAS device is encrypted both at rest and in transit. This protects the data from being accessed or intercepted by unauthorized individuals.
5. Backup and disaster recovery: Security audits can review the backup and disaster recovery processes in place for the NAS device. This includes assessing the frequency of backups, the integrity of backup files, and the existence of a tested recovery plan. Regular backups and a robust recovery plan can help mitigate the risk of data loss in case of a security incident.
6. Network security: Vulnerability assessments can evaluate the network security measures implemented for the NAS device. This includes assessing firewall configurations, intrusion detection and prevention systems, and network segmentation. By securing the network infrastructure surrounding the device, the risk of unauthorized access and data loss can be reduced.
7. Employee awareness and training: Security audits can assess the level of employee awareness and training regarding data security. Regular training sessions can help educate employees about best practices for data protection, such as avoiding phishing attacks, using strong passwords, and being cautious with sharing sensitive information. This can reduce the likelihood of human error leading to data loss.

By regularly conducting vulnerability assessments and security audits, organizations can proactively identify and address potential data loss risks for NAS Digiever MN-1136 Pro+ devices, thereby enhancing the overall security posture and protecting sensitive data.

How to Remove Hard Disks from Your NAS and Connect Them to a PC

Although the NAS MN-1136 Pro+ can be accessed over the network, you still need to remove its hard disks and connect them directly to a Windows PC. Only then can the recovery software properly scan and analyze the drives. Follow these steps:

1. Power off the NAS and disconnect it from the power source.

   WARNING! Before removing any drives, carefully read the device manual. Improper actions may damage both the NAS enclosure and the hard disks in the RAID array.

2. Remove the hard disks one by one, gently sliding each drive out of its slot. Remember that hard disks are highly sensitive: any impact or drop can cause serious physical damage.

3. Label each hard disk according to its position inside the NAS. The order of the drives is crucial for correct RAID reconstruction.

4. Connect the drives to your computer. In this video, we explain which ports you can use to connect hard disks and what to do if your PC does not have enough free connectors.

   Go to view

   

   How to Order Remote Data Recovery

Step-by-Step Data Recovery with Hetman RAID Recovery

This program restores data from damaged RAID arrays and is fully compatible with Digiever MN-1136 Pro+. Each hard disk in the array contains technical metadata describing how files were written. When launched, Hetman RAID Recovery analyzes this metadata, automatically reconstructs the damaged array, and provides access to its contents. After that, you can browse the recovered disk and save your files. The program can also restore files that were accidentally deleted from the network drive.

Go to view

How to recover data from a Digiever

MN-1136 Pro+ has 1 HDD slots, and it supports the following array types:

• None;

NAS supports:

• exFAT, VFAT, FAT 12 / 16 / 32;
• NTFS / ReFS;
• APFS / HFS+;
• Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
• VMFS / HikvisionFS;

How to Safely Recover Data from Disk Images

This utility allows you to create a complete copy of a disk and work with the disk image instead of the physical drive. This approach helps protect your data from:

• Overwriting during the recovery process;
• Additional data loss caused by bad sectors;
• User errors.

To create a disk image, follow these steps:

1. Ensure you have enough free space to store the image. Its size will typically match the size of the original disk.

2. In the main window, select the target disk and choose Tools - Save Disk. You can also select multiple disks if needed.

3. When the Image Creation Wizard opens, select whether you want to save the entire disk or only a specific region. Adjust the settings and click Next.

   

4. Choose the directory where the image will be saved. You may select any available disk connected to your PC or upload the image via FTP.

   

Where Are the User’s Files Actually Stored?

The Digiever MN-1136 Pro+ network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

RAID Recovery Software: Detailed Comparison