Faulty RAID Array Solutions for NAS Idis DR-2208P Data Restoration

Contents

• Why Regular Data Recovery Tools Can’t Restore Files from RAID
• Key Information About the NAS Idis DR-2208P
• How to Remove Hard Disks from Your NAS and Connect Them to a PC
  • Step-by-Step Data Recovery with Hetman RAID Recovery
  • How to Safely Recover Data from Disk Images
  • Where Are the User’s Files Actually Stored?
  • RAID Recovery Software: Detailed Comparison

Why Regular Data Recovery Tools Can’t Restore Files from RAID

Conventional hard drives store user data by writing it sequentially across the disk surface, which means an entire file is typically located on a single drive. In contrast, when data is written to a RAID array, each file is split into multiple fragments. These fragments are then distributed and written in sequence across all the drives in the array. Depending on the configuration, fragment sizes can range from 2 KB to 2 MB, so every file is physically stored across several disks at once.

This approach significantly increases read and write performance — after all, writing two halves of a 1 GB file to two drives simultaneously is much faster than writing the full 1 GB to a single disk. However, this same mechanism makes file recovery far more complex.

Different RAID levels use different methods to distribute and protect data. On top of that, manufacturers like Idis often add their own proprietary structures and variations. As a result, data can be written to disks in many different formats, and each requires a specific approach during recovery.

How can the NAS Idis DR-2208P device's CPU or processing power affect data transfer and potential loss?

The CPU or processing power of the NAS Idis DR-2208P device can have an impact on data transfer and potential data loss in the following ways:

1. Data Transfer Speed: The CPU of a NAS device is responsible for handling various tasks, including data encryption, compression, and network protocol processing. A more powerful CPU can handle these tasks more efficiently, resulting in faster data transfer speeds. A slower CPU may struggle to keep up with high data transfer rates, leading to slower file transfers.
2. Concurrent Connections: The CPU's processing power determines the number of concurrent connections the NAS device can handle effectively. If the CPU is underpowered, it may struggle to handle multiple simultaneous connections, leading to slower data transfer speeds and potential data loss.
3. Data Integrity: The CPU plays a crucial role in ensuring data integrity during data transfers. It is responsible for error detection and correction, as well as data verification. A powerful CPU can handle these tasks more effectively, reducing the chances of data corruption or loss during transfer.
4. RAID Performance: The NAS device may use RAID (Redundant Array of Independent Disks) for data protection and performance enhancement. The CPU's processing power influences the RAID performance, including RAID calculations, parity generation, and data reconstruction. A more powerful CPU can handle these tasks quickly, minimizing the impact on data transfer speeds and reducing the risk of potential data loss.
5. Network Traffic Management: The CPU is responsible for managing network traffic and allocating resources to different data transfer processes. If the CPU is overwhelmed with processing tasks, it may struggle to prioritize network traffic effectively, resulting in slower data transfers and potential data loss.

In summary, a more powerful CPU in the NAS Idis DR-2208P device can improve data transfer speeds, handle concurrent connections more efficiently, ensure data integrity, enhance RAID performance, and effectively manage network traffic, reducing the risk of potential data loss.

How to Remove Hard Disks from Your NAS and Connect Them to a PC

Although the NAS DR-2208P can be accessed over the network, you still need to remove its hard disks and connect them directly to a Windows PC. Only then can the recovery software properly scan and analyze the drives. Follow these steps:

1. Power off the NAS and disconnect it from the power source.

   WARNING! Before removing any drives, carefully read the device manual. Improper actions may damage both the NAS enclosure and the hard disks in the RAID array.

2. Remove the hard disks one by one, gently sliding each drive out of its slot. Remember that hard disks are highly sensitive: any impact or drop can cause serious physical damage.

3. Label each hard disk according to its position inside the NAS. The order of the drives is crucial for correct RAID reconstruction.

4. Connect the drives to your computer. In this video, we explain which ports you can use to connect hard disks and what to do if your PC does not have enough free connectors.

   Go to view

   

   How to Order Remote Data Recovery

Step-by-Step Data Recovery with Hetman RAID Recovery

This program restores data from damaged RAID arrays and is fully compatible with Idis DR-2208P. Each hard disk in the array contains technical metadata describing how files were written. When launched, Hetman RAID Recovery analyzes this metadata, automatically reconstructs the damaged array, and provides access to its contents. After that, you can browse the recovered disk and save your files. The program can also restore files that were accidentally deleted from the network drive.

Go to view

How to recover data from a Idis

DR-2208P has 2 HDD slots, and it supports the following array types:

• RAID 0;
• RAID 1;
• JBOD;

NAS supports:

• exFAT, VFAT, FAT 12 / 16 / 32;
• NTFS / ReFS;
• APFS / HFS+;
• Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
• VMFS / HikvisionFS;

How to Safely Recover Data from Disk Images

This utility allows you to create a complete copy of a disk and work with the disk image instead of the physical drive. This approach helps protect your data from:

• Overwriting during the recovery process;
• Additional data loss caused by bad sectors;
• User errors.

To create a disk image, follow these steps:

1. Ensure you have enough free space to store the image. Its size will typically match the size of the original disk.

2. In the main window, select the target disk and choose Tools - Save Disk. You can also select multiple disks if needed.

3. When the Image Creation Wizard opens, select whether you want to save the entire disk or only a specific region. Adjust the settings and click Next.

   

4. Choose the directory where the image will be saved. You may select any available disk connected to your PC or upload the image via FTP.

   

Where Are the User’s Files Actually Stored?

The Idis DR-2208P network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

RAID Recovery Software: Detailed Comparison