Data Recovery Software for NAS Infortrend EonStor CS 4060D: Choosing the Right Solution

Has your NAS Infortrend EonStor CS 4060D suddenly lost its network drive and you’re unsure what to do next? Did the RAID array collapse, making your files inaccessible? Is the device throwing errors during startup? Perhaps you accidentally rebuilt the RAID array or several hard drives failed at the same time?

Data Recovery Software for NAS Infortrend EonStor CS 4060D: Choosing the Right Solution
Free Download

Infortrend EonStor CS 4060D NAS Data Recovery in 2025

In this step-by-step tutorial, we’ll show you how to rebuild your RAID and recover data from an EonStor CS 4060D. We’ll walk through the most common causes of failure and demonstrate proven methods to restore files from a lost or degraded RAID array.

Data Recovery Software for NAS Infortrend EonStor CS 4060D: Choosing the Right Solution

RAID Recovery™ 2.8
Recover data from damaged RAID arrays inaccessible from a computer.
Download

Why Regular Data Recovery Tools Can’t Restore Files from RAID

Conventional hard drives store user data by writing it sequentially across the disk surface, which means an entire file is typically located on a single drive. In contrast, when data is written to a RAID array, each file is split into multiple fragments. These fragments are then distributed and written in sequence across all the drives in the array. Depending on the configuration, fragment sizes can range from 2 KB to 2 MB, so every file is physically stored across several disks at once.

This approach significantly increases read and write performance — after all, writing two halves of a 1 GB file to two drives simultaneously is much faster than writing the full 1 GB to a single disk. However, this same mechanism makes file recovery far more complex.

Different RAID levels use different methods to distribute and protect data. On top of that, manufacturers like Infortrend often add their own proprietary structures and variations. As a result, data can be written to disks in many different formats, and each requires a specific approach during recovery.

How can regular software updates and patches enhance the security and stability of NAS Infortrend EonStor CS 4060D devices?

Regular software updates and patches can enhance the security and stability of NAS Infortrend EonStor CS 4060D devices in the following ways:

  1. Security Vulnerability Fixes: Software updates and patches often include fixes for known security vulnerabilities. By regularly updating the software, you ensure that any identified security loopholes or weaknesses are addressed, reducing the risk of unauthorized access or data breaches.
  2. Bug Fixes and Stability Improvements: Updates and patches also address any bugs or stability issues identified in the software. By installing these updates, you can enhance the overall stability and performance of your NAS device, reducing the likelihood of system crashes or data corruption.
  3. Compatibility with New Technologies: Software updates often introduce compatibility with new technologies, protocols, or hardware. By keeping your NAS device up to date, you ensure that it can work seamlessly with new devices, operating systems, or network configurations, enhancing its functionality and connectivity.
  4. Performance Optimization: Updates and patches may include performance optimizations, improving the speed and efficiency of your NAS device. This can result in faster file transfers, improved response times, and overall better user experience.
  5. New Features and Functionality: Software updates sometimes introduce new features or functionality to the NAS device. By regularly updating, you can benefit from these enhancements, such as improved data management tools, advanced security features, or integration with cloud services.
  6. Compliance with Industry Standards: Regular updates ensure that your NAS device remains compliant with the latest industry standards and regulations. This is particularly important for data security and privacy requirements, such as GDPR or HIPAA, as updates often include necessary security measures to meet these standards.

To ensure the security and stability of your NAS Infortrend EonStor CS 4060D devices, it is recommended to regularly check for software updates and patches provided by the manufacturer. Follow their instructions to install the updates correctly, and consider enabling automatic updates whenever possible to ensure continuous protection.

How to Remove Hard Disks from Your NAS and Connect Them to a PC

Although the NAS EonStor CS 4060D can be accessed over the network, you still need to remove its hard disks and connect them directly to a Windows PC. Only then can the recovery software properly scan and analyze the drives. Follow these steps:

  1. Power off the NAS and disconnect it from the power source.

    WARNING! Before removing any drives, carefully read the device manual. Improper actions may damage both the NAS enclosure and the hard disks in the RAID array.

  2. Remove the hard disks one by one, gently sliding each drive out of its slot. Remember that hard disks are highly sensitive: any impact or drop can cause serious physical damage.

  3. Label each hard disk according to its position inside the NAS. The order of the drives is crucial for correct RAID reconstruction.

  4. Connect the drives to your computer. In this video, we explain which ports you can use to connect hard disks and what to do if your PC does not have enough free connectors.

    Go to view
    How to Order Remote Data Recovery

    How to Order Remote Data Recovery

Step-by-Step Data Recovery with Hetman RAID Recovery

Hetman Raid Recovery

This program restores data from damaged RAID arrays and is fully compatible with Infortrend EonStor CS 4060D. Each hard disk in the array contains technical metadata describing how files were written. When launched, Hetman RAID Recovery analyzes this metadata, automatically reconstructs the damaged array, and provides access to its contents. After that, you can browse the recovered disk and save your files. The program can also restore files that were accidentally deleted from the network drive.

Go to view
How to recover data from a Infortrend

How to recover data from a Infortrend

EonStor CS 4060D has 60 HDD slots, and it supports the following array types:

  • RAID 0;
  • RAID 1;
  • RAID 5;
  • RAID 6;
  • RAID 50;
  • RAID 60;
  • JBOD;

NAS supports:

  • exFAT, VFAT, FAT 12 / 16 / 32;
  • NTFS / ReFS;
  • APFS / HFS+;
  • Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
  • VMFS / HikvisionFS;

How to Safely Recover Data from Disk Images

This utility allows you to create a complete copy of a disk and work with the disk image instead of the physical drive. This approach helps protect your data from:

  • Overwriting during the recovery process;
  • Additional data loss caused by bad sectors;
  • User errors.

To create a disk image, follow these steps:

  1. Ensure you have enough free space to store the image. Its size will typically match the size of the original disk.

  2. In the main window, select the target disk and choose Tools - Save Disk. You can also select multiple disks if needed.

  3. When the Image Creation Wizard opens, select whether you want to save the entire disk or only a specific region. Adjust the settings and click Next.

    Hetman RAID Recovery: Image Creation Wizard

  4. Choose the directory where the image will be saved. You may select any available disk connected to your PC or upload the image via FTP.

    Hetman RAID Recovery: Choose a disk or save the image via FTP

Where Are the User’s Files Actually Stored?

The Infortrend EonStor CS 4060D network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

RAID Recovery Software: Detailed Comparison

Product Operating system RAID controller support Supported file systems Virtual RAID controller support Data recovery from damaged RAID File preview
Hetman RAID Recovery Windows, Linux, MacOS Yes, over 100 controllers FAT, exFAT, NTFS, ReFS, APFS, HFS+, Ext4, Ext3, Ext2, ReiserFS, Btrfs, VMFS, Hikvision, XFS, UFS, ZFS Yes Yes Yes
DiskInternals RAID Recovery Windows Yes, over 10 controllers FAT, NTFS, Ext2/3/4, HFS+ No Yes Yes
R-Studio Windows, Mac, Linux Yes, over 20 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes
UFS Explorer RAID Recovery Windows, Mac, Linux Yes, over 100 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes
EaseUS Data Recovery Windows Yes, over 20 controllers FAT, NTFS, Ext2/3/4, HFS+ No Yes Yes
ReclaiMe Free RAID Recovery Windows Yes, over 100 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes

Feedback

We will be happy to answer your questions!

Comments (3)

  • Hetman Software: Data Recovery
    Hetman Software: Data Recovery 9.08.2022 12:31 #
    If you want to ask a question about data recovery, from NAS EonStor CS 4060D, feel free to leave a comment!
    Reply
  • Fred Newdigate
    Fred Newdigate 2.09.2023 17:42 #
    How to recover data from NAS Infortrend EonStor CS 4060D?
    Reply
    • Hetman Software
      Hetman Software 2.09.2023 17:59 #

      To recover data from a NAS Infortrend EonStor CS 4060D, follow these steps:

      1. Identify the issue: Determine the reason for data loss, such as accidental deletion, formatting, or hardware failure. This will help you choose the appropriate recovery method.
      2. Disconnect the NAS: If the NAS is still operational, it is crucial to disconnect it from the network to prevent any further data loss or overwriting of the files.
      3. Contact a professional data recovery service: Infortrend EonStor CS 4060D is a complex storage system, and attempting data recovery without proper expertise may result in further damage. Contact a professional data recovery service with experience in NAS systems for assistance.
      4. Provide necessary details: When contacting the data recovery service, provide them with all the necessary information about the NAS model, the type of data loss, and any other relevant details. This will help them assess the situation and provide appropriate solutions.
      5. Follow the instructions: The data recovery service will guide you through the necessary steps to recover the lost data. They may request access to the NAS or ask you to send it to their facility for analysis and recovery.
      6. Evaluate the recovered data: Once the data recovery process is complete, the service will provide you with the recovered data. Make sure to carefully evaluate and verify the recovered files to ensure they are intact and in the correct format.
      7. Take preventive measures: After successfully recovering the data, it is essential to take preventive measures to avoid future data loss. This may include implementing regular backups, improving system security, and following best practices for data management.

      Remember, data recovery can be a complex and time-consuming process, and success may vary depending on the extent of the damage. Seeking professional assistance is highly recommended to maximize the chances of successful recovery.

      Reply
Post comment
User
Leave a reply(Hetman Software).Cancel reply
Your email address will not be published. Required fields are marked *

  • Updated:
  • Evaluations:
  • 2
  • /
  • :
Vladimir Artiukh

Author: Vladimir Artiukh, Technical Writer

Vladimir Artiukh is a technical writer for Hetman Software, as well as the voice and face of their English-speaking YouTube channel, Hetman Software: Data Recovery for Windows. He handles tutorials, how-tos, and detailed reviews on how the company’s tools work with all kinds of data storage devices.

Oleg Afonin

Editor: Oleg Afonin, Technical Writer

Oleg Afonin is an expert in mobile forensics, data recovery and computer systems. He often attends large data security conferences, and writes several blogs for such resources as xaker.ru, Elcomsoft and Habr. In addition to his online activities, Oleg’s articles are also published in professional magazines. Also, Oleg Afonin is the co-author of a well-known book, Mobile Forensics - Advanced Investigative Strategies.

Share

Questions and answers

  • How does the NAS Infortrend EonStor CS 4060D enhance the functionality and efficiency of a smart home system?

    The NAS Infortrend EonStor CS 4060D can enhance the functionality and efficiency of a smart home system in several ways:

    1. Storage and Backup: The NAS provides a large storage capacity, allowing users to store and backup data from various smart home devices such as security cameras, smart thermostats, and smart appliances. This ensures that all data is securely stored and easily accessible when needed.
    2. Centralized Management: With the NAS, users can centralize the management of their smart home system. They can access and control all connected devices and data from a single interface, making it convenient and efficient to monitor and manage the entire smart home ecosystem.
    3. Data Sharing and Collaboration: The NAS enables seamless data sharing and collaboration within the smart home system. Users can easily share files, media, and other data across different devices and with other family members or authorized individuals. This promotes better communication and coordination within the smart home environment.
    4. Remote Access and Control: The NAS allows users to remotely access and control their smart home system from anywhere using a mobile device or computer. This means users can monitor security cameras, adjust thermostat settings, or control other devices even when they are away from home. It provides flexibility and convenience for managing the smart home system.
    5. Data Security and Privacy: The NAS offers advanced security features such as data encryption, access controls, and RAID protection. This ensures that all data stored in the NAS is secure and protected from unauthorized access or data loss. It enhances the overall security and privacy of the smart home system.
    6. Scalability and Future-Proofing: The NAS is designed to be scalable, allowing users to expand storage capacity as their smart home system grows. It supports various storage expansion options, ensuring that the NAS can accommodate future needs and technologies. This makes it a future-proof solution for a smart home system.

    Overall, the NAS Infortrend EonStor CS 4060D enhances the functionality and efficiency of a smart home system by providing robust storage, centralized management, remote access, data security, and scalability. It allows users to fully leverage the capabilities of their smart home devices and create a seamless and integrated smart home experience.

  • What are the key features and specifications of the NAS Infortrend EonStor CS 4060D that make it suitable for integration into a smart home setup?

    The Infortrend EonStor CS 4060D is a Network Attached Storage (NAS) device that offers several key features and specifications that make it suitable for integration into a smart home setup. Here are some of its notable features:

    1. High Capacity: The CS 4060D has a high storage capacity, supporting up to 60 hard drives, allowing for large amounts of data to be stored and accessed within a smart home environment.
    2. Scalability: It offers scalability options, allowing users to easily expand storage capacity as their smart home setup grows and their data storage needs increase.
    3. High Performance: The NAS device is equipped with high-performance hardware components, such as a powerful processor and ample memory, ensuring smooth and efficient data processing and access.
    4. RAID Support: It supports various RAID configurations, including RAID 0, 1, 5, 6, 10, 50, and 60, providing data redundancy and protection against drive failures, which is crucial for the reliability of a smart home setup.
    5. Data Protection: The CS 4060D offers advanced data protection features, such as snapshot technology, which allows users to take point-in-time copies of their data, ensuring quick recovery in case of accidental deletion or corruption.
    6. Data Management: It provides comprehensive data management capabilities, including data deduplication and compression, which help optimize storage utilization and reduce storage costs within a smart home environment.
    7. Multi-Protocol Support: The NAS device supports various network protocols, such as NFS, SMB/CIFS, and iSCSI, enabling seamless integration with different smart home devices and platforms.
    8. Remote Access: It allows for remote access to data stored on the NAS, enabling users to access their smart home data and media files from anywhere, enhancing convenience and accessibility.
    9. Data Backup and Synchronization: The CS 4060D offers backup and synchronization features, allowing users to automatically back up their smart home data to external devices or cloud storage, ensuring data redundancy and protection.
    10. Energy Efficiency: The NAS device is designed to be energy-efficient, consuming less power during operation, which is essential for a smart home setup that aims to minimize energy consumption and reduce environmental impact.

    These features and specifications make the Infortrend EonStor CS 4060D a suitable choice for integration into a smart home setup, providing reliable and scalable storage solutions with advanced data protection and management capabilities.

  • How does the NAS Infortrend EonStor CS 4060D ensure data security and reliability for a smart home system, especially considering the sensitive nature of personal information and home automation data?

    The NAS Infortrend EonStor CS 4060D ensures data security and reliability for a smart home system in several ways, taking into account the sensitive nature of personal information and home automation data:

    1. Data Encryption: The NAS supports various encryption technologies such as AES 256-bit encryption, ensuring that data stored on the system is protected and inaccessible to unauthorized users. This prevents any potential data breaches or unauthorized access to personal information.
    2. Access Control: The NAS provides robust access control mechanisms, including user authentication, permissions, and role-based access control. This ensures that only authorized individuals can access sensitive data, preventing unauthorized access or tampering.
    3. Redundancy and High Availability: The NAS employs redundant components such as power supplies, fans, and network interfaces, ensuring high availability and minimizing the risk of data loss or system downtime. This redundancy ensures that even in the event of a hardware failure, the system continues to operate and data remains accessible.
    4. RAID Technology: The NAS supports various RAID configurations, such as RAID 5 or RAID 6, which provide data redundancy and protection against drive failures. This ensures that even if a hard drive fails, data remains intact and accessible.
    5. Data Backup and Snapshot: The NAS offers data backup and snapshot capabilities, allowing users to create regular backups of their data and take point-in-time snapshots for quick recovery in case of accidental data loss or corruption. This ensures data reliability and provides an additional layer of protection against data loss.
    6. Secure Remote Access: The NAS supports secure remote access protocols such as VPN and SSL/TLS, enabling users to access their data securely from anywhere while preventing unauthorized access. This ensures that personal information and home automation data remain protected even when accessed remotely.
    7. Compliance with Data Protection Regulations: The NAS complies with various data protection regulations, such as GDPR (General Data Protection Regulation), ensuring that personal information stored on the system is handled in accordance with legal requirements.

    By implementing these security measures, the NAS Infortrend EonStor CS 4060D ensures that data stored in a smart home system remains secure, reliable, and protected from unauthorized access or data loss.
This website uses cookies to improve your experience. Description