How to Restore NAS Lenovo Iomega StorCenter px12-450r Data After Deletion

Has your NAS Lenovo Iomega StorCenter px12-450r suddenly lost its network drive and you’re unsure what to do next? Did the RAID array collapse, making your files inaccessible? Is the device throwing errors during startup? Perhaps you accidentally rebuilt the RAID array or several hard drives failed at the same time?

How to Restore NAS Lenovo Iomega StorCenter px12-450r Data After Deletion
Free Download

Lenovo Iomega StorCenter px12-450r NAS Data Recovery in 2025

In this step-by-step tutorial, we’ll show you how to rebuild your RAID and recover data from an Iomega StorCenter px12-450r. We’ll walk through the most common causes of failure and demonstrate proven methods to restore files from a lost or degraded RAID array.

How to Restore NAS Lenovo Iomega StorCenter px12-450r Data After Deletion

RAID Recovery™ 2.8
Recover data from damaged RAID arrays inaccessible from a computer.
Download

Why Regular Data Recovery Tools Can’t Restore Files from RAID

Conventional hard drives store user data by writing it sequentially across the disk surface, which means an entire file is typically located on a single drive. In contrast, when data is written to a RAID array, each file is split into multiple fragments. These fragments are then distributed and written in sequence across all the drives in the array. Depending on the configuration, fragment sizes can range from 2 KB to 2 MB, so every file is physically stored across several disks at once.

This approach significantly increases read and write performance — after all, writing two halves of a 1 GB file to two drives simultaneously is much faster than writing the full 1 GB to a single disk. However, this same mechanism makes file recovery far more complex.

Different RAID levels use different methods to distribute and protect data. On top of that, manufacturers like Lenovo often add their own proprietary structures and variations. As a result, data can be written to disks in many different formats, and each requires a specific approach during recovery.

Is there a risk of data loss if a NAS Lenovo Iomega StorCenter px12-450r device is physically damaged or stolen?

Yes, there is a risk of data loss if a NAS device like the Lenovo Iomega StorCenter px12-450r is physically damaged or stolen. If the device is damaged, the data stored on the drives may become inaccessible or corrupted. Similarly, if the device is stolen, there is a risk that sensitive data could be accessed by unauthorized individuals. It is important to have appropriate backup measures in place to mitigate the risk of data loss in such situations.

How to Remove Hard Disks from Your NAS and Connect Them to a PC

Although the NAS Iomega StorCenter px12-450r can be accessed over the network, you still need to remove its hard disks and connect them directly to a Windows PC. Only then can the recovery software properly scan and analyze the drives. Follow these steps:

  1. Power off the NAS and disconnect it from the power source.

    WARNING! Before removing any drives, carefully read the device manual. Improper actions may damage both the NAS enclosure and the hard disks in the RAID array.

  2. Remove the hard disks one by one, gently sliding each drive out of its slot. Remember that hard disks are highly sensitive: any impact or drop can cause serious physical damage.

  3. Label each hard disk according to its position inside the NAS. The order of the drives is crucial for correct RAID reconstruction.

  4. Connect the drives to your computer. In this video, we explain which ports you can use to connect hard disks and what to do if your PC does not have enough free connectors.

    Go to view
    How to Order Remote Data Recovery

    How to Order Remote Data Recovery

Step-by-Step Data Recovery with Hetman RAID Recovery

Hetman Raid Recovery

This program restores data from damaged RAID arrays and is fully compatible with Lenovo Iomega StorCenter px12-450r. Each hard disk in the array contains technical metadata describing how files were written. When launched, Hetman RAID Recovery analyzes this metadata, automatically reconstructs the damaged array, and provides access to its contents. After that, you can browse the recovered disk and save your files. The program can also restore files that were accidentally deleted from the network drive.

Go to view
How to recover data from a Lenovo

How to recover data from a Lenovo

Iomega StorCenter px12-450r has 12 HDD slots, and it supports the following array types:

  • RAID 0;
  • RAID 1;
  • RAID 5;
  • RAID 6;
  • RAID 50;
  • RAID 60;
  • JBOD;

NAS supports:

  • exFAT, VFAT, FAT 12 / 16 / 32;
  • NTFS / ReFS;
  • APFS / HFS+;
  • Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
  • VMFS / HikvisionFS;

How to Safely Recover Data from Disk Images

This utility allows you to create a complete copy of a disk and work with the disk image instead of the physical drive. This approach helps protect your data from:

  • Overwriting during the recovery process;
  • Additional data loss caused by bad sectors;
  • User errors.

To create a disk image, follow these steps:

  1. Ensure you have enough free space to store the image. Its size will typically match the size of the original disk.

  2. In the main window, select the target disk and choose Tools - Save Disk. You can also select multiple disks if needed.

  3. When the Image Creation Wizard opens, select whether you want to save the entire disk or only a specific region. Adjust the settings and click Next.

    Hetman RAID Recovery: Image Creation Wizard

  4. Choose the directory where the image will be saved. You may select any available disk connected to your PC or upload the image via FTP.

    Hetman RAID Recovery: Choose a disk or save the image via FTP

Where Are the User’s Files Actually Stored?

The Lenovo Iomega StorCenter px12-450r network-attached storage keeps LifeLine operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

RAID Recovery Software: Detailed Comparison

Product Operating system RAID controller support Supported file systems Virtual RAID controller support Data recovery from damaged RAID File preview
Hetman RAID Recovery Windows, Linux, MacOS Yes, over 100 controllers FAT, exFAT, NTFS, ReFS, APFS, HFS+, Ext4, Ext3, Ext2, ReiserFS, Btrfs, VMFS, Hikvision, XFS, UFS, ZFS Yes Yes Yes
DiskInternals RAID Recovery Windows Yes, over 10 controllers FAT, NTFS, Ext2/3/4, HFS+ No Yes Yes
R-Studio Windows, Mac, Linux Yes, over 20 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes
UFS Explorer RAID Recovery Windows, Mac, Linux Yes, over 100 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes
EaseUS Data Recovery Windows Yes, over 20 controllers FAT, NTFS, Ext2/3/4, HFS+ No Yes Yes
ReclaiMe Free RAID Recovery Windows Yes, over 100 controllers FAT, NTFS, Ext2/3/4, HFS+ Yes Yes Yes

Feedback

We will be happy to answer your questions!

Comments (3)

  • Hetman Software: Data Recovery
    Hetman Software: Data Recovery 9.08.2022 12:31 #
    If you want to ask a question about data recovery, from NAS Iomega StorCenter px12-450r, feel free to leave a comment!
    Reply
  • Brooks Perks
    Brooks Perks 21.08.2023 19:54 #
    Is it possible to recover data from a NAS Lenovo Iomega StorCenter px12-450r device that has been affected by a controller failure or disk array problem?
    Reply
    • Hetman Software
      Hetman Software 21.08.2023 20:00 #

      Yes, it is possible to recover data from a NAS Lenovo Iomega StorCenter px12-450r device that has been affected by a controller failure or disk array problem. However, the process of data recovery can be complex and may require the assistance of professional data recovery services.

      In case of a controller failure, it may be necessary to replace the faulty controller with a new one and ensure it is compatible with the NAS device. This can be a delicate process, as it involves handling sensitive hardware components.

      If the issue is related to a disk array problem, it is essential to identify the specific problem, such as a failed disk or a corrupted RAID configuration. In some cases, replacing the faulty disk and rebuilding the RAID array may be sufficient to recover the data. However, it is crucial to ensure that the correct procedures are followed to avoid further data loss.

      It is recommended to consult with a professional data recovery service that specializes in NAS devices to assess the situation and provide the best course of action for data recovery. They have the expertise and tools required to handle complex data recovery scenarios and maximize the chances of successful data retrieval.

      Reply
Post comment
User
Leave a reply(Hetman Software: Data Recovery).Cancel reply
Your email address will not be published. Required fields are marked *

  • Updated:
  • Evaluations:
  • 7
  • /
  • :
Vladimir Artiukh

Author: Vladimir Artiukh, Technical Writer

Vladimir Artiukh is a technical writer for Hetman Software, as well as the voice and face of their English-speaking YouTube channel, Hetman Software: Data Recovery for Windows. He handles tutorials, how-tos, and detailed reviews on how the company’s tools work with all kinds of data storage devices.

Oleg Afonin

Editor: Oleg Afonin, Technical Writer

Oleg Afonin is an expert in mobile forensics, data recovery and computer systems. He often attends large data security conferences, and writes several blogs for such resources as xaker.ru, Elcomsoft and Habr. In addition to his online activities, Oleg’s articles are also published in professional magazines. Also, Oleg Afonin is the co-author of a well-known book, Mobile Forensics - Advanced Investigative Strategies.

Share

Questions and answers

  • What are the necessary steps to connect the NAS Lenovo Iomega StorCenter px12-450r to a router?

    To connect the Lenovo Iomega StorCenter px12-450r NAS to a router, follow these necessary steps:

    1. Ensure that you have all the required equipment: the NAS device, an Ethernet cable, and a router with available Ethernet ports.
    2. Power on the NAS device by plugging it into a power source.
    3. Connect one end of the Ethernet cable to the LAN port on the back of the NAS device.
    4. Connect the other end of the Ethernet cable to an available LAN port on your router. Make sure the cable is securely connected.
    5. Power on your router if it is not already powered on.
    6. Wait for the NAS device to establish a connection with the router. This process may take a few minutes.
    7. Once the connection is established, check the router's interface or use a network scanning tool to identify the IP address assigned to the NAS device.
    8. Open a web browser on a computer connected to the same network as the NAS device.
    9. Enter the IP address of the NAS device into the browser's address bar and press Enter.
    10. You will be prompted to enter the login credentials for the NAS device. If you have not set up any credentials, try using the default username and password provided in the device's manual.
    11. Follow the on-screen instructions to complete the initial setup and configuration of the NAS device.

    After completing these steps, the Lenovo Iomega StorCenter px12-450r NAS should be successfully connected to your router and accessible on your network.

  • Are there any specific network settings or configurations required to establish a connection between the NAS and the router?

    Yes, there are specific network settings and configurations required to establish a connection between the NAS (Network Attached Storage) device and the router. Here are some common steps to set up the connection:

    1. Connect the NAS device to the router using an Ethernet cable or via a wireless connection.
    2. Ensure that the NAS and the router are on the same network subnet. This means that they should have similar IP addresses. For example, if the router's IP address is 192.168.1.1, the NAS can have an IP address like 192.168.1.2.
    3. Set up a static IP address for the NAS. This ensures that the IP address of the NAS remains constant, even if the router is restarted. You can configure the static IP address either on the NAS itself or through the router's DHCP settings.
    4. Configure port forwarding on the router if you want to access the NAS remotely. This involves opening specific ports on the router and forwarding them to the NAS's IP address. The exact steps for port forwarding depend on the router's make and model.
    5. Enable network sharing protocols like SMB (Server Message Block) or NFS (Network File System) on the NAS. These protocols allow other devices on the network to access the shared files and folders on the NAS.
    6. Set up appropriate network permissions and access controls on the NAS to secure the shared data.

    It's important to consult the NAS device's manual or manufacturer's website for specific instructions on configuring the network settings, as the steps may vary depending on the NAS model and the router being used.

  • Can you provide a detailed guide or tutorial on how to connect the NAS Lenovo Iomega StorCenter px12-450r to different types of routers (e.g., wired or wireless)?

    Certainly! Here's a step-by-step guide on how to connect the Lenovo Iomega StorCenter px12-450r NAS to different types of routers, both wired and wireless:

    1. Wired Connection:

    a. Start by connecting one end of an Ethernet cable to the LAN port on the back of the NAS device.

    b. Connect the other end of the Ethernet cable to an available LAN port on your router.

    c. Ensure that both the NAS and the router are powered on.

    1. Wireless Connection:

    a. Access the configuration page of your router by typing its IP address into a web browser. The default IP address is usually mentioned on the router or in its documentation.

    b. Log in to the router's configuration page using your username and password. If you haven't changed them, the default credentials should be mentioned in the router's manual.

    c. Locate the wireless settings in the router's configuration page. Look for options like "Wireless Settings," "Wi-Fi," or "Wireless Setup."

    d. Enable the wireless network by toggling the Wi-Fi option or selecting "Enable."

    e. Assign a unique SSID (network name) to your wireless network. Make sure it's easily identifiable and secure.

    f. Set a strong password for your wireless network. Use a combination of uppercase and lowercase letters, numbers, and special characters.

    g. Save the wireless settings and exit the router's configuration page.

    1. Connecting NAS Wirelessly:

    a. On the NAS device, navigate to the network settings menu. This is typically found in the device's control panel or administration settings.

    b. Look for the wireless network settings and select "Scan for Networks" or a similar option.

    c. Choose your wireless network from the list of available networks and enter the password you set earlier.

    d. Save the settings, and the NAS will attempt to connect to the wireless network.

    e. Wait for the NAS to establish a connection with the wireless network. This may take a few moments.

    f. Once connected, you can access the NAS wirelessly using its assigned IP address or hostname.

    Note: It's important to ensure that the NAS and the router are on the same network subnet. If you encounter any issues, consult the user manual specific to your NAS device or router, or reach out to Lenovo support for further assistance.
This website uses cookies to improve your experience. Description