How to Choose Data Recovery Software for Lost NAS Buffalo TeraStation TS3410DN1204 Data

Contents

• Why Regular Data Recovery Tools Can’t Restore Files from RAID
• Key Information About the NAS Buffalo TeraStation TS3410DN1204
• How to Remove Hard Disks from Your NAS and Connect Them to a PC
  • Step-by-Step Data Recovery with Hetman RAID Recovery
  • How to Safely Recover Data from Disk Images
  • Where Are the User’s Files Actually Stored?
  • RAID Recovery Software: Detailed Comparison

Why Regular Data Recovery Tools Can’t Restore Files from RAID

Conventional hard drives store user data by writing it sequentially across the disk surface, which means an entire file is typically located on a single drive. In contrast, when data is written to a RAID array, each file is split into multiple fragments. These fragments are then distributed and written in sequence across all the drives in the array. Depending on the configuration, fragment sizes can range from 2 KB to 2 MB, so every file is physically stored across several disks at once.

This approach significantly increases read and write performance — after all, writing two halves of a 1 GB file to two drives simultaneously is much faster than writing the full 1 GB to a single disk. However, this same mechanism makes file recovery far more complex.

Different RAID levels use different methods to distribute and protect data. On top of that, manufacturers like Buffalo often add their own proprietary structures and variations. As a result, data can be written to disks in many different formats, and each requires a specific approach during recovery.

How can the NAS Buffalo TeraStation TS3410DN1204 device's CPU or processing power affect data transfer and potential loss?

The CPU or processing power of the NAS Buffalo TeraStation TS3410DN1204 device can have an impact on data transfer speed and potential data loss in the following ways:

1. Data Transfer Speed: The CPU of a NAS device plays a crucial role in handling data transfer requests. A more powerful CPU can handle multiple data transfer requests simultaneously, resulting in faster data transfer speeds. On the other hand, a slower CPU might struggle to keep up with high data transfer demands, leading to slower transfer speeds.
2. Network Protocol Support: The CPU's processing power also affects the NAS device's ability to support different network protocols such as SMB, NFS, FTP, etc. Some protocols require more CPU power to process and transfer data efficiently. If the CPU is underpowered, it might struggle to handle certain protocols, leading to slower data transfer speeds.
3. Data Encryption and Compression: Many NAS devices offer data encryption and compression features to enhance security and storage efficiency. These tasks require significant CPU processing power. If the CPU is not powerful enough, enabling encryption or compression can slow down data transfer speeds. Additionally, if the CPU is overwhelmed, there is a higher chance of data loss or corruption during encryption or compression processes.
4. RAID Rebuild and Data Recovery: In case of a disk failure in a RAID array, the NAS device needs to rebuild the data or perform data recovery operations. These tasks heavily rely on the CPU's processing power. A more powerful CPU can handle these operations faster, minimizing the time window for potential data loss. A slower CPU might take longer to rebuild the RAID or recover data, increasing the risk of data loss.
5. System Stability: A powerful CPU can handle multiple tasks simultaneously without experiencing performance degradation. If the CPU is underpowered, it might struggle to handle multiple data transfer requests or other background processes, potentially leading to system instability. In such cases, data transfer interruptions or errors can occur, increasing the risk of data loss.

It is important to consider the CPU's processing power when selecting a NAS device, especially if you anticipate high data transfer demands or require advanced features such as encryption and compression.

How to Remove Hard Disks from Your NAS and Connect Them to a PC

Although the NAS TeraStation TS3410DN1204 can be accessed over the network, you still need to remove its hard disks and connect them directly to a Windows PC. Only then can the recovery software properly scan and analyze the drives. Follow these steps:

1. Power off the NAS and disconnect it from the power source.

   WARNING! Before removing any drives, carefully read the device manual. Improper actions may damage both the NAS enclosure and the hard disks in the RAID array.

2. Remove the hard disks one by one, gently sliding each drive out of its slot. Remember that hard disks are highly sensitive: any impact or drop can cause serious physical damage.

3. Label each hard disk according to its position inside the NAS. The order of the drives is crucial for correct RAID reconstruction.

4. Connect the drives to your computer. In this video, we explain which ports you can use to connect hard disks and what to do if your PC does not have enough free connectors.

   Go to view

   

   How to Order Remote Data Recovery

Step-by-Step Data Recovery with Hetman RAID Recovery

This program restores data from damaged RAID arrays and is fully compatible with Buffalo TeraStation TS3410DN1204. Each hard disk in the array contains technical metadata describing how files were written. When launched, Hetman RAID Recovery analyzes this metadata, automatically reconstructs the damaged array, and provides access to its contents. After that, you can browse the recovered disk and save your files. The program can also restore files that were accidentally deleted from the network drive.

Go to view

How to recover data from a Buffalo

TeraStation TS3410DN1204 has 4 HDD slots, and it supports the following array types:

• RAID 0;
• RAID 1;
• RAID 5;
• RAID 6;
• JBOD;

NAS supports:

• exFAT, VFAT, FAT 12 / 16 / 32;
• NTFS / ReFS;
• APFS / HFS+;
• Ext2 / 3 / 4 / ReiserFS / XFS / UFS / ZFS / Btrfs;
• VMFS / HikvisionFS;

How to Safely Recover Data from Disk Images

This utility allows you to create a complete copy of a disk and work with the disk image instead of the physical drive. This approach helps protect your data from:

• Overwriting during the recovery process;
• Additional data loss caused by bad sectors;
• User errors.

To create a disk image, follow these steps:

1. Ensure you have enough free space to store the image. Its size will typically match the size of the original disk.

2. In the main window, select the target disk and choose Tools - Save Disk. You can also select multiple disks if needed.

3. When the Image Creation Wizard opens, select whether you want to save the entire disk or only a specific region. Adjust the settings and click Next.

   

4. Choose the directory where the image will be saved. You may select any available disk connected to your PC or upload the image via FTP.

   

Where Are the User’s Files Actually Stored?

The Buffalo TeraStation TS3410DN1204 network-attached storage keeps OS Linux operating system files on a separate RAID 1 (mirrored) array. Usually, all NAS systems create several volumes on every hard disk, and the first of them takes up to 2 Gb of space. This is where operating system files are stored. Other volumes are united into a RAID array where user’s data is written.

RAID Recovery Software: Detailed Comparison